Resetting The Picture Settings To The Factory Defaults; Changing The Picture Size; Freezing The Current Picture; Digital Noise Reduction - Samsung LE32S62 Owner's Instructions Manual

resetting the Picture Settings to the Factory defaults

Changing the Picture Size

You can select these options
by simply pressing the P.SiZe
button on the remote control.

Freezing the Current Picture

digital noise reduction

You can return to the factory defaults picture settings.
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number  to 4 on page 2.
2. Press the  or  button to select "Reset", then press the
enter button.
3. Press the exit button to exit.
The "Reset" will be set for each picture mode.
You can select the picture size which best corresponds to your
viewing requirements.
1. Press the menu button to display the menu. Press the  or  button to
select "Picture", then press the enter
2. Press the  or  button to select "Size", then press
the enter button.
3. S elect the required option by pressing the  or  button.
Press the enter
4. Press the exit button to exit.
 auto Wide: Automatically adjusts the picture size to the "6:9" aspect ratio.
 16:9: Adjusts the picture size to 6:9 appropriate for DVDs or wide broadcasting.
 Zoom: Magnifies the 6:9 wide picture (in the vertical direction) to fit the screen size.
 4:3: This is the default setting for a video movie or normal broadcasting.
"Auto Wide" function is available only in "TV", "Ext", "Ext2", "AV", and "S-Video" mode.
In PC Mode, only "6:9" and "4:3" mode can be adjusted.
Select by pressing the  or  buttons. Use the  or  button to move the
picture up and down. After selecting
the picture size in the vertical direction.
Press the STILL button to freeze a moving picture into a still one.
Press again to cancel.
If the broadcast signal received by your TV is weak, you can activate the
Digital Noise Reduction feature to help reduce any static and ghosting
that may appear on the screen.
1. Press the menu button to display the menu. Press the  or  button to
select "Picture", then press the enter
2. Press the  or  button to select "Digital NR", then press the
enter button.
3. P ress the  or  button to select "On" or "Off". Press the enter
4. P ress the exit button to exit.
English-3
button.
button.
, use the  or  button to magnify or reduce
button.
button.