Formatting A Memory Card; File Name - Samsung Digimax 530 User Manual

Formatting a memory card

This is used for formatting the memory. If you run [FORMAT] on the memory, all images, including
the protected images, will be deleted. Be sure to download important images to your PC before
formatting the memory. If the memory card is not inserted, the internal memory will be formatted.
Formatting a Memory Card
1. Rotate the mode dial to SETUP mode and the [SETUP
1/3] menu will display.
2. Select the [FORMAT] menu by pressing the UP/ DOWN
button and press the RIGHT button.
3. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
If [NO] is selected : The memory will not be formatted.
If [YES] is selected : The memory will be formatted.
INFORMATION
Be sure to run [FORMAT] on the following types of memory card.
- A new memory card, or an unformatted memory card.
- A memory card that has a file this camera can t recognize or one that has been taken
from another camera.
Always format the memory card using this camera. If you insert a memory card that has
been formatted using other cameras, memory card readers, or PCs, you will get a [CARD
ERROR!] message.

File name

This function allows the user to select the file naming format.
Assigning File Names
1. Rotate the mode dial to SETUP mode and the [SETUP
1/3] menu will display.
2. Select the [FILE NAME] menu by pressing the UP/
DOWN button and press the RIGHT button.
3. Select a desired sub menu by pressing the UP/ DOWN
button and press the OK button.
[RESET] : After using the reset function, the next file
name will be set from 0001 even after
formatting, deleting all or inserting a new memory card.
[SERIES] : Under this system, the file name will directly follow the last stored file name,
regardless of any actions such as file deletion or formatting.
SETUP 1/3
FORMAT
NO
YES
BACK:
SETUP 1/3
FILE NAME
RESET
SERIES
BACK:
SET:OK
SET:OK
59