Table of Contents
Advertisement
1 Connecting to an Aerial or Cable Television Network
Connect the aerial or network input cable to the 75 Ω coaxial socket.
To view television channels correctly, a signal must be received by the set from one of the sources: an outdoor aerial, cable
television network, or satellite network. If you are using an indoor aerial, you may need to adjust it when tuning your television
until you obtain a picture that is both sharp and clear.
2 Connecting to the COMPONENT Input
◆ Connect component video cables to component connector (Y, P
corresponding component video out connectors on the DTV receiver or DVD player.
◆ The Y, P
and P
connectors on your component devices (DTV receiver or DVD player) are sometimes labeled Y, B-Y and R-Y
B
R
or Y, Cb and Cr.
◆ Connect RCA audio cables to AUDIO (L/R) IN on the rear of your television and the other ends to corresponding audio out
connectors on the DTV receiver or DVD player.
3 Connecting to the SCART Input/Output
Connect SCART cable to an appropriate external A/V device such as a VCR, DVD player, decoder, satellite receiver, video game
device, or video disc player.
- The EXT1 (RGB) connector is used for equipment with an RGB output, such as a video game device or video disc player.
- The EXT2 (AV) connector is used for the audio/video output of current television programme.
4 Connecting to the HDMI (depending on the model)
◆ Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players, AV receivers and
digital TVs).
◆ No additional Audio connection is needed for an HDMI to HDMI connection.
What is HDMI?
◆ "High Definition Multimedia interface" allows the transmission of high definition digital video data and multiple channels
of digital audio (5.1 channels).
The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied). The
difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy
Protection) coding feature installed, and supports multi - channel digital audio.
◆ You should use the DVI-to-HDMI cable or DVI-HDMI Adapter for the connection, and the AUDIO (L/R) connector on DVI for
sound output.
When connecting this product via HDMI or DVI to a Set Top Box, DVD Player or Games Console etc, make sure that it has
been set to a compatible video output mode as shown in the table below. Failure to observe this may result in picture
distortion, image breakup or no picture.
Supported modes for HDMI and COMPONENT
HDMI
Component
Do not attempt to connect the HDMI connector to a PC or Laptop Graphics Card.
(This will result in a blank screen being displayed.)
5 Connecting to the RCA/S-VIDEO Input
◆ Connect RCA video or S-Video cable to VIDEO IN or S-VIDEO IN on the rear of your television and the other ends to
corresponding video or S-Video out connectors on the A/V device.
◆ Connect RCA audio cables to AUDIO (L/R) IN on the rear of your television and the other ends to corresponding audio out
connectors on the A/V device.
480i-60Hz
480p-60Hz
X
O
O
O
English - 6
, P
) on the rear of your television and the other ends to
B
R
576i-50Hz
576p-50Hz
X
O
O
O
720p-50/60Hz
1080i-50/60Hz
O
O
O
O
Hide quick links:
Advertisement
Table of Contents
