Plug & Play Feature - Samsung CRT Direct View TV Owner's Instructions Manual

Samsung colour television owner's instructions
Table of Contents

Advertisement

KS1A_01602B_ENG
8/13/02
ENG
Plug & Play
Ant. Input Check
Auto Store
P 1
471 MHz
Exit
Time
Time
Clock
Clock
Move
ENJOY YOUR WATCHING
Enjoy Your Watching...
Language : English
Time
Plug & Play
Blue Screen
Child Lock
Low Noise AMP
Select
Enter
3:00 PM
Page 10
Plug & Play Feature
When the television is initially powered ON, three basic customer
settings proceed automatically and subsequently: setting the
language, channel and clock.
Exit
48 %
- - : - -
11 : 35
AM
Exit
Function
: Off
: Off
Exit
10
1
If the television is in Standby mode, press the POWER
on the remote control.
Result:
The message "Plug & Play" is displayed. It flickers for a
little while and then the "Language" menu is automatically
displayed.
2
Press the L or M button to select required language. Press the
MENU button to enter the language, and then the message "Ant.
Input Check" is displayed.
If any language is not selected on the "Language" menu, the
"Language" menu will be displayed about 30 seconds later.
3
Make sure that the antenna is connected to the TV. And then press
+
the
or
button to store the channels (refer to "Storing the
Channels Automatically" on page 12).
Result:
The horizontal bar is displayed, and then channels are
stored in an order which reflects their positions in the
frequency range.
4
When searching and storing is complete, the "Time" menu is
displayed.
5
+
Press the
or
button to move to the hour or minute. Set the hour
or minute by pressing the L or M button (refer to "Setting and
Displaying the Current Time" on page 23).
6
When you have finished, press the MENU button.
Result:
The message "ENJOY YOUR WATCHING" is displayed,
and then the channel which has been stored will be
activated.
7
If you want to reset this feature...
1
Press the MENU button.
Press the L or M button to select the "Function", and then
2
+
press the
or
button.
Select the "Plug & Play" by pressing the L or M button, and
3
+
then press the
or
Result:
The message "Plug & Play" is displayed.
button.
button

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents