Samsung C21RJAN series Installation And Operating Instructions Manual
Ceramic glass hob
Hide thumbs
Also See for C21RJAN series:
- Installation and operating instructions manual (158 pages) ,
- Installation and operating instructions manual (224 pages) ,
- User manual (24 pages)
Related Manuals for Samsung C21RJAN series
Summary of Contents for Samsung C21RJAN series
-
Page 1: Ceramic Glass Hob
Installation and Operating Instructions Ceramic Glass Hob C21RJAN series To avoid the risk of accidents or damage to the hob, read all instructions before installing or using the appliance. Keep this manual for future reference. -
Page 3: Table Of Contents
Contents Using This Manual Safety Electrical safety Child safety Safety during use Safety when cleaning Disposal Instructions Installing the Hob Regulations and compliance Safety instructions for the installer Connecting to the outlet Installing into the countertop Parts and Features Cooking zones and control panel Components The key features of your appliance Safety shutoff... -
Page 4: Using This Manual
Using This Manual Please take the time to read this owner’s manual, paying particular attention to the safety information contained in the following section, before using your appliance Keep this manual for future reference If transferring ownership of the appliance, please remember to pass the manual on to the new owner The following symbols are used in the text This is the safety alert symbol... -
Page 5: Electrical Safety
Safety The safety aspects of this appliance comply with accepted technical standards and the German Appliance Safety Law However, as manufacturers we also believe it is our responsibility to familiarise you with the following safety instructions Electrical safety • Be sure the appliance is properly installed and grounded by a qualified technician. •... -
Page 6: Safety During Use
Safety (continued) Safety during use • This appliance is to be used only for normal cooking and frying in the home It is not designed for commercial or industrial use • Never use the hob for heating the room • Take care when plugging electrical appliances into mains sockets near the hob Mains leads must not come into contact with the hob •... -
Page 7: Installing The Hob
Installing the Hob Important: Be sure the new appliance is installed and grounded only by qualified personnel Please observe this instruction The warranty will not cover any damage that may occur as a result of improper installation Technical data is provided at the end of this manual Regulations and compliance This appliance meets the following standards: •... -
Page 8: Connecting To The Outlet
Installing the Hob (Continued) Connecting to the outlet Before connecting, check that the nominal voltage of the appliance, that is, the voltage stated on the rating plate, corresponds to the available supply voltage The rating plate is located on the lower casing of the hob The heating element voltage is AC240 V~ This appliance is equipped with a cord that includes a grounding wire and a grounding plug The plug must be plugged into an outlet that is properly installed and grounded... -
Page 9: Parts And Features
Parts and Features Cooking zones and control panel Control panel Timer indicator and control sensors Indicators for heat settings and residual heat Heat setting selectors “On/Off” control sensor Single cooking zone 1950W Single cooking zone 1300 W “Lock” control sensor... -
Page 10: Components
Parts and Features (Continued) Components Ceramic Glass Hob Screws Installation Brackets... -
Page 11: The Key Features Of Your Appliance
Parts and Features (Continued) The key features of your appliance • Ceramic glass cooking surface: The appliance has a ceramic glass cooking surface and four rapid - response cooking zones The hob’s powerful radiant heater elements significantly shorten the amount of time required for the zones to heat up. •... -
Page 12: Safety Shutoff
Parts and Features (Continued) Safety shutoff If one of the cooking zones is not switched off or the heat setting is not adjusted after an extended period of time, that particular cooking zone will automatically switch itself off Any residual warmth will be indicated with the particular cooking zones The cooking zones switch themselves off at the following times Cooking setting... -
Page 13: Before You Begin
Before You Begin Initial cleaning Wipe the ceramic glass surface with a damp cloth and ceramic hob glass cleaner Important: Do not use caustic or abrasive cleaners The surface could be damaged Hob Use Using suitable cookware Better pans produce better results •... -
Page 14: Using The Touch Control Sensors
Hob Use (Continued) • Always position pots and pans before switching on the cooking zone • Dirty cooking zones and pan bases increase power consumption • When possible, position the lids firmly on the pots and pans to cover completely. •... -
Page 15: Switching The Appliance On
Hob Use (Continued) Switching the appliance on Touch the “Lock ” sensor for approximately 3 seconds The appliance is switched on using the “On / Off Touch the “On / Off ” sensor The digital displays will show After the “On / Off ”... -
Page 16: Switching The Appliance Off
Hob Use (Continued) Switching the appliance off To completely switch off the appliance, use the “On / Off Touch the “On / Off ” sensor After switching off a single cooking zone or the entire cooking surface, the presence of residual heat will be indicated in the digital displays of the corresponding cooking zones in the form of an If the heat setting is at and touched one additional time, and the heat setting will go to zero... -
Page 17: Using The Child Safety Lock
Hob Use (Continued) Using the child safety lock You can use the child safety lock to safeguard against unintentionally turning on a cooking zone and activating the cooking surface The lock control sensor can be used only when the power is on Switching the child safety lock on 1 Touch the control sensor for approximately 3 seconds... -
Page 18: Locking And Unlocking The Control Panel
Hob Use (Continued) Switching the child safety lock off 1 Touch the control sensor for approximately 3 seconds An acoustic signal will sound as confirmation. Locking and unlocking the control panel At any stage during the cooking process, the control panel, with the exception of the “On / Off ”... -
Page 19: Timer
Hob Use (Continued) Timer There are two ways to use the timer: Using the timer as a safety shutoff If a specific time is set for a cooking zone, the cooking zone will shut itself off once this period of time has elapsed This function can be used for multiple cooking zones simultaneously Using the timer to count down The countdown timer cannot be used if a cooking zone has been switched on Setting the safety shutoff... -
Page 20: Countdown Timer
Hob Use (Continued) To display the time remaining for any of the cooking zones, use the timer’s control sensor The corresponding control indicator will begin to blink slowly The settings are reset using the time has elapsed, the cooking zone automatically switches itself off, an acoustic signal sounds as confirmation and the timer display indicates. -
Page 21: Cleaning And Care
Cleaning and Care Important: Cleaning agents must not come into contact with a heated ceramic glass surface: All cleaning agents must be removed with adequate amounts of clean water after cleaning because they can have a caustic effect when the surface becomes hot Do not use any aggressive cleaners such as grill or oven sprays, scouring pads or abrasive pan cleaners Clean the ceramic glass surface after each use when it is still warm to the touch... -
Page 22: To Avoid Damaging Your Appliance
Cleaning and Care (Continued) Problem Dirt 1 Remove burnt-on sugar, melted plastic, aluminium foil or other materials with a glass scraper immediately and while still hot Important: There is a risk of burning yourself when the glass scraper is used on a hot cooking zone: 2 Clean the hob as normal when it has cooled down If the cooking zone on which something has melted... -
Page 23: Warranty And Service
Warranty and Service FAQs and troubleshooting A fault may result from a minor error that you can correct yourself with the help of the following instructions Do not attempt any further repairs if the following instructions do not help in each specific case. -
Page 24: Service
Warranty and Service (Continued) What does it mean when the burner does not glow red? • The selected temperature of the cooking zone is maintained by a sensor that cycles the zone on and off, so the surface cooking area will not always glow red If you select a low heat setting, the heat will cycle on and off more frequently than at higher settings The heat also cycles on and off at the highest setting If you request a service call because of an error made in operating the appliance, the visit from... -
Page 25: Technical Data
Technical Data Appliance dimensions Width 288 mm Depth 505 mm Height 50 mm Worktop cut - out dimensions Width 273 mm Depth 490 mm Corner radius 3 mm Cooking rings Position Diameter Front 148 mm Rear 183 mm Connection voltage Maximum connected load power Weight : Gross... - Page 26 Note...
- Page 27 Note...
- Page 28 Code No :DG- 00144A-01...