Samsung SyncMaster F2080 Quick Start Manual
Samsung lcd monitor quick start guide
Hide thumbs
Also See for SyncMaster F2080:
- User manual (44 pages) ,
- Guía de inicio rápido (16 pages) ,
- Quick start manual (15 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Samsung SyncMaster F2080
Summary of Contents for Samsung SyncMaster F2080
-
Page 1: Lcd Monitor
SyncMaster F2080,F2380 LCD MONITOR quick start guide... -
Page 2: Installing The Product
Installing the Product Package Contents • Unpack the product and check if all of the following contents have been included. • Store the packaging box in case you need to move the Product at a later stage. Installation Manual Product Warranty Power Cord D-Sub Cable Installing the Stand... - Page 3 Place a soft cloth over the table to protect the product and place the product onto the cloth so that the front of the product is facing downwards. Do not remove the stopper pin before installing the base. Hold the main body of the product with your hand as shown by the figure. Insert the stand base into the stand connection part in the direction shown in the figure.
-
Page 4: Installing The Stand For The Wall Mount
Disassembly is in the reverse order of the assembly. Installing the Stand for the Wall Mount Before installation, disassemble the product according to the following steps. Installing the Product After the installation of the base, stand the monitor up as shown in the figure. Now you can remove the stopper pin to adjust the stand. - Page 5 This product provides a stand mount of 100 mm x 100 mm(200 mm x 100 mm) that complies with the VESA specifications. 1. Turn the product off and unplug the power cord from the wall outlet. 2. Place a soft cloth or cushion on a flat surface to protect the panel and place the product down on the cloth so that the front of the product faces downwards.
-
Page 6: Connecting With A Pc
• If you use a screw that is longer than the standard specifications, the inside of the product may be damaged. • For wall mounts that are not compatible with the standard VESA specifications, the length of the screw may differ depending on the corresponding specifications. -
Page 7: Kensington Lock
(The input voltage is switched automatically.) POWER S/W ON [ │ ] / OFF Switches the LCD Display On/Off. When the product is connected to a PC, you can turn the product on and use it. When all the DVI (digital) and D-Sub (analog) cables are connected, you can select the input signal (Analog/Digital 1/Digital 2) by pressing the /SOURCE button. -
Page 8: Product Operating Buttons
Locking the product 1. Insert the locking part of the locking device into the hole of the Kensington lock of the product and turn it in the locking direction. 2. Connect the Kensington lock cable. 3. Tie the Kensington lock cable to a desk or heavy object. You can purchase the locking device from an electronics store, an online shop, or our service center. - Page 9 Icon AUTO Press [AUTO] button to adjust the screen settings automatically If the resolution settings are changed in the Display Properties, the AUTO adjustment func- tion is performed. Press this button to turn the product on or off Power LED This LED is turned on when the product works normally.
-
Page 10: Troubleshooting
Before Requesting Service Please check the following before requesting After-Sales service. If the problem continues, please contact your nearest Samsung Electronics Service Center. A blank screen appears / I cannot turn the product on Is the power cord connected properly? Is the “Check Sinal Calbe”... - Page 11 The display area suddenly moves to an edge or to the center. Did you change the graphics card or the driver? Did you change the resolution and frequency appropriate to the product? Is the graphics card configured correctly? Did you change the resolution and the frequency appropriate to the product? The color is displayed in 16 bit (16 colors).
- Page 12 FAQ! How can I change the resolution? How can I use the power saving function? Troubleshooting Please try the following! Windows XP : Change the resolution by selecting Control → → Panel Appearance and Themes Windows ME/2000 : Change the resolution by selecting Con- →...