•
Port: enter the port number of the proxy
server.
•
Linger time: set a time period after which the
network is disconnected if there has been no
new data traffic in that time.
•
DNS: activate or deactivate the DNS (Domain
Name Server) addresses.
•
DNS 1 and DNS 2: enter the primary and
secondary DNS addresses.
•
Bearer: select the network bearer type.
•
Advanced settings: change the advanced
options. Depending on the bearer setting,
available options vary.
When the bearer is set to GPRS:
APN: enter the access point name.
Login ID: enter the login ID.
Password: enter the login password.
When the bearer is set to GSM:
Dial number: enter the PPP phone number.
Login ID: enter the login ID.
Password: enter the login password.
Data call type: select a call type for data
transmission.
3. Press <Save> to save the profile.
Using profile options
Press <Options> to access the following options:
•
Edit: edit the selected profile.
•
Delete: delete the profile.
•
Add new connection: add a new profile.
Reset settings
(Menu 9.9)
Use this menu to reset the phone's settings you have
changed.
1. Press [
] to select the setting categories to be
reset.
2. Press <Reset>.
3. Press <Yes> to confirm the reset.
4. Enter the phone password and press <OK>.
The password is preset to 00000000. You can
change this password.
!
p. 85
87