Table of Contents
Advertisement
Check interval: determine how often the phone
checks the server for incoming e-mails. If you
select Do not notify, use the Check for new
email option to receive new e-mails manually.
Read reply: determine whether or not the phone
sends a read-reply for incoming e-mails. If you
select Reply reminder, the phone asks you to
send a read-reply.
Reject if larger than: determine the maximum
size for incoming e-mails. Your phone will reject
e-mails that exceed the specified size.
Download method: set whether the phone
downloads e-mail headers only or e-mail headers
and bodies both.
Leave copy of messages on server: leave
copies of e-mails on the e-mail server after
retrieving.
•
Block list: specify e-mail addresses or subjects
you want to reject.
•
Email account: set up an e-mail account and
select an account to be used.
Current account: select an account.
Account settings: configure e-mail accounts
using different e-mail servers. Set the options for
each account:
- Account name: enter a name for the currently
selected account.
- User name: enter a user name.
- Email address: enter your e-mail address.
- SMTP server: enter the IP address or host name
of the outgoing e-mail server.
- SMTP port: enter the SMTP port number.
- Connect to POP3 server first: connect to the
POP3 server before connecting to the SMTP
server to send e-mails.
- Protocol type: select the protocol for the
incoming e-mail server. The remaining options
depend on the protocol type setting.
When the protocol type is POP3:
- POP3 server: enter the IP address or host name
of the server that receives your e-mail.
- POP3 port: enter the POP3 port number.
- User ID: enter the POP3 user name.
59
Advertisement
Table of Contents
