Related Manuals for Samsung SC-MX10
Summary of Contents for Samsung SC-MX10
-
Page 1: User Manual
Memory Camcorder user manual imagine the possibilities Thank you for purchasing this Samsung product. To receive more complete service, please register your product at www.samsung.com/global/register SC-MX10 SC-MX10P SC-MX10A SC-MX10AU... - Page 2 2.7" Wide (16:9) LCD Display (112K Pixels) You can see the bigger picture by enlarging the 4:3 aspect ratio into 16:9 wide screen with the 2.7" wide (16:9) LCD screen. The 112K pixel LCD monitor rotates up to 270 degrees for flexible viewing angles and provides sharp, detailed image for monitoring and playback.
- Page 3 Enjoying Various Playback Features Unlike tape operation, playback is simple and easy in this memory camcorder since no time is needed for rewinding or fast forward operations. Various functions are available for enjoying many different types of playback. page 58 ~ 61 ➥...
-
Page 4: Important Safety Instructions
To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Apparatus To Rain Or Moisture. Caution Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. - Page 5 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
- Page 6 17. POWER SOURCES: The CAMCORDER should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supply at your home, consult your appliance dealer or local power company.
- Page 7 23. OVERLOADING: Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 24. OBJECTS AND LIQUIDS: Never push objects of any kind into this...
- Page 8 See www.dtsc.ca.gov/hazardouswaste/perchlorate.” viii_English NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
- Page 9 Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. If this power supply is used at 240V ac, a suitable plug adaptor should be used. CLASS 1 LASER PRODUCT KLASSE 1 LASER PRODUKT...
-
Page 10: Important Information On Use
Make a backup of important recorded data • - Protect your important recorded data by copying the files to a PC. We also recommend you copy it from your PC to other recording media for storage. Refer to the software installation and USB connection guide. - Page 11 Handle the liquid crystal display (LCD) with care: • - The LCD is a very delicate display device: Do not press its surface with excessive force, hit it or prick it with a sharp object. - If you push the LCD surface, unevenness in display may occur. If unevenness does not disappear, turn the camcorder off, wait for a few moments, and then turn it on again.
- Page 12 • Heat on surface of product: - The surface of the memory camcorder will be slightly warm when in use, but this does not indicate a fault. Be careful of unusual ambient temperature: • - Using the memory camcorder in a place where the temperature is over 140°F (40°C) or lower than 32°F (0°C) may result in abnormal recording/playback.
- Page 13 Do not use the memory camcorder near corrosive gas: - If the memory camcorder is used in a place where there is dense exhaust gas generated by gasoline or diesel engines, or corrosive gas such as hydrogen sulfide, the external or internal terminals could corrode, disabling normal operation, or the battery connection terminals could corrode, so that power will not turn on.
-
Page 14: Notes Regarding A Trademark
Illustrations of model SC-MX10A are used in this user manual. • The displays in this user manual may not be exactly the same as those you see on the LCD screen. Designs and specifications of storage media and other accessories are subject to change without any notice. -
Page 15: Table Of Contents
Adjusting the LCD screen Using the MENU button Using the Control buttons Shortcut menu (OK Guide) Initial setting : OSD Language & date and time Selecting the storage media (SC-MX10A/MX10AU only) Inserting / ejecting the memory card Selecting the suitable memory card... - Page 16 Digital Zoom Setting the play option Deleting movie images Protecting movie images Copying movie images (SC-MX10A/MX10AU only) 16:9 Wide File Information Changing the menu settings in "Settings" Setting menu items Date/Time set Date format Time format Date/Time LCD Brightness LCD color...
-
Page 17: Specifications
System requirements Installing the software Connecting the USB cable Viewing the contents of storage media Transferring files from the memory camcorder to your PC Using the PC Cam function Viewing on TV Screen Recording (Dubbing) Images on Other Video Devices... -
Page 18: Quick Start Guide
This chapter introduces you to the basic features of your memory camcorder. • See the reference pages for more information. • Step1 Preparation Preparation Connecting a power source • ➥ Check out the storage media • ➥... -
Page 19: Getting To Know Your Memory Camcorder
WHAT'S INCLUDED WITH YOUR MEMORY CAMCORDER Your new memory camcorder comes with the following accessories. If any of these items is missing from your box, call Samsung’s Customer Care Center. ✪ The exact shape of each item may vary by model. - Page 20 FRONT & LEFT VIEW Lens Internal microphone MENU button OK button Control button ( Recording start/stop button 08_English LCD screen Built-in speaker LCD ENHANCER ( Zoom lever (W/T) 9 10 button ) button...
-
Page 21: Side & Bottom View
SIDE & BOTTOM VIEW MODE indicator (record( ) / player ( Multi cable jack (AV/ USB jack (USB) DC IN jack (DC IN) EASY.Q button Charging indicator (CHG) POWER switch MODE button Recording start/stop button Grip belt Swivel Hand-grip Grip belt hook... -
Page 22: Using The Accessories
• • Put your hand in a position where you can easily operate the Recording start/stop button and the Zoom lever. Adjust the length of grip belt so that the memory camcorder is stable when you press the Recording start/stop •... - Page 23 3. Push both sides of cap inward and attach it over the lens. Using the cradle (optional accessory) The Cradle is a connection plate which can be used to make the camcorder more stable when charging the battery,or connecting to a TV or a PC.
-
Page 24: Connecting A Power Source
3. Slide and close the battery slot cover Ejecting the battery pack 1. Slide and open the battery slot cover and push the battery lock. Gently push the battery lock in the direction as shown in the fi gure to eject • the battery out. - Page 25 Make sure that the battery pack fits firmly into place. Do not drop the battery pack as it may cause damage. • Be careful to keep the battery pack out of the reach of children. There is danger that a child might swallow it. •...
- Page 26 When not using the memory camcorder for an extended period: It is recommended that you fully charge the battery pack once a year, attach it to memory camcorder and use it up : then remove the battery pack and store it in a cool place again.
- Page 27 Assume that the recordable time with a fully charged battery pack is between 1/2 and 1/3 of the time in the table, and prepare type and number of battery packs to allow for the time you are planning to record on the memory camcorder.
- Page 28 To check the remaining battery charge When the camcorder is turned off (battery is installed) press and release the • button to display the remaining capacity of the battery capacity. When the camcorder is turned on (battery is installed) press and hold the •...
-
Page 29: Battery Level Display
Battery Level Display The Battery Level Display shows the amount of battery power remaining in the battery pack. Battery Level Indicator Exhausted(fl ickers): The device will soon turn off. Change the Battery Pack as soon as possible. (fl ickers): The device will be forced to turn off... - Page 30 Even if your camcorder is turned off, AC power (house current) is still supplied to it while connected to the wall outlet via the AC power adaptor. Do not use the AC adaptor placed in a narrow space, such as between a •...
- Page 31 • Using other AC power adaptors could cause electric shock or result in fi re. The AC power adaptor can be used around the world. An AC plug adaptor is required in some foreign • countries. If you need one, purchase it from an electronics store.
-
Page 32: Button Type Battery Installation
The button type battery maintains the clock function and preset contents of the memory : even if the battery pack or AC power adapter is removed. 1. Insert the button type battery in the battery slot on the bottom of the memory camcorder. -
Page 33: Basic Operation Of Your Memory Camcorder
BASIC OPERATION OF YOUR MEMORY CAMCORDER This section explains the basic techniques of recording movies, and also basic settings on your memory camcorder. Set the appropriate operation mode according to your preference using POWER switch and MODE button. Turning memory camcorder on or off You can turn the power on or off by sliding the POWER switch down. -
Page 34: Lcd Screen Indicators
2007/01/01 12:00AM The above screen is an example for explanation: • The displays in this user manual may not be exactly the same as those you see on the LCD screen. The OSD indicators are based on memory capacity •... - Page 35 LCD SCREEN INDICATORS STBY 00:00:00/00:58:00 Delete 100-0001 Move Play Movie Record mode: Shortcut menu (OK Guide) Movie Play mode Exit MENU Screen size (16:9 Wide/4:3) Focus (Auto Focus/Manual Focus) * Shortcut menu (OK Guide) / Return White balance * Exposure (Auto Exposure/Manual Exposure)
- Page 36 2007/01/01 12:00AM 00:00:00/00:23:00 List ZOOM 24_English Movie Play mode Movie Play mode Play Status Time code (Elapsed time / Recorded time) Storage media (Built-in memory (SC-MX10A/MX10AU only) or memory card) Battery info.(Remaining battery level/time) LCD Enhancer * Protect 100-0001 File Name...
-
Page 37: Turning The Screen Indicators On/Off
Minimum display mode: Only operating status indicator will appear. • Checking the remained battery and memory capacity When the camcorder is turned off (battery is installed) press and release the • button to display the remaining capacity of the battery capacity. -
Page 38: Using The Lcd Enhancer
LCD ENHANCER function does not affect the quality of the image being recorded. LCD POWER SAVING FUNCTION The LCD screen is turned off after a certain period of time has passed (see below) in each mode • in order to prevent unnecessary battery power consumption. -
Page 39: Adjusting The Lcd Screen
1. Open up the LCD screen 90 degrees with your fi nger. 2. Rotate it to the best angle to record or play. • If you rotate the LCD screen 180 degrees to the lens side, you can close the LCD screen with it facing out. This is convenient during playback. -
Page 40: Using The Control Buttons
USING THE CONTROL BUTTONS Used for playback, pausing, fast forwarding, and rewinding. Also used as directional buttons (up, down, left, right) and to make a selection when selecting movie images or menus. 1. Press the Control button ( 2. Press the Control button ( Confi rm your selection by pressing the OK button. -
Page 41: Shortcut Menu (Ok Guide)
Decreases the volume - Search playback RPS (Reverse Playback Search) rate: x2 → x4 → x8 → x16 → x32 → x64) - Skip Playback - Search playback FPS (Forward Playback Search) rate: x2 → x4 → x8 → x16 → x32 → x64) -
Page 42: Initial Setting : Osd Language & Date And Time
You can select the desired language to display the menu screen and the messages. 1. Set the "Settings" mode. The settings menu screen appears. • Refer to "How to set the settings mode" for accessing to " Settings " mode. • 2. Press the Control button ( 3. Press the Control button ( and then press the OK button. - Page 43 Setting Date and Time Set the current date and time so that the date and time at which you make a recording can be recorded correctly. The following procedure can also be used to correct the date and time you have already set.
-
Page 44: About The Storage Media
SELECTING THE STORAGE MEDIA (SC-MX10A/MX10AU ONLY) You can record moving on the built-in memory or a memory card, so you should select the desired storage media before starting recording or playback. Selecting the storage media (SC-MX10A/MX10AU only) Selecting the recording medium is available in the Movie record / Movie Play modes. -
Page 45: Inserting / Ejecting The Memory Card
• - Some cards are not compatible depending on the memory card manufacturer and memory card type. If you insert a memory card when the memory camcorder is on, the pop-up message will prompt you • automatically to select the storage type. -
Page 46: Selecting A Suitable Memory Card
Turning the power off or removing a memory card during operation such as formatting, deleting, recording, • and playback may cause the data loss. After you modify the name of a fi le or folder stored in the memory card using your PC, your camcorder may • not recognize the modifi ed fi le. - Page 47 If you cannot use a memory card that has been used with another device, format it with your memory camcorder. • Note that formatting erases all information on the memory card. A memory card has a certain life span. If you cannot record new data, you have to purchase a new memory card. • •...
-
Page 48: Recordable Time And Capacity
85min. approx. 170min. 1GB=1,000,000,000bytes : actual formatted capacity may be less as the internal firmware uses a portion of the memory. 240p, 480i/480p refer to resolutions the camcorder will record at. • The above figures are measured under Samsung’s standard recording test conditions and may differ •... - Page 49 (Write speed: 1.25 MB / sec or higher) If you use a low write-speed memory card, recording may stop with a message of "Low speed card. Please record at lower quality". If you inevitably use a low speed card, select a lower quality ("Fine" → "Normal") or set the movie size to 352p.
-
Page 50: Recording Movie Images
Memory camcorder provides two Recording start/stop buttons. One is on the rear side of the camcorder and the other one is on the LCD panel. Select the Recording start/ stop button that works best for you. 1. Turn the memory camcorder on. - Page 51 • Doing so may damage the storage media or the data on storage media. Before recording an important movie, make sure to test on the recording function to check if there is any • problem with the audio and video recording.
-
Page 52: Recording With Ease For Beginners (Easy.q Mode)
3. Press the EASY.Q button. • When you press the EASY.Q button, all functions on the memory camcorder will be set to off and the recording settings will be set to the following basic modes. (Scene Mode (AE), White Balance, Auto Exposure, Anti-Shake (EIS), Digital Effect, Auto Focus and Back Light) •... - Page 53 Digital zooming is possible up to 1200x. Set "Digital Zoom" to "On". Be sure to keep your fi nger on the Zoom lever. If you move your fi nger • off the zoom lever, the operation sound of the Zoom lever may be also recorded.
-
Page 54: Movie Images Playback
MOVIE IMAGES PLAYBACK You can fi nd a desired movie image quickly using thumbnail index view. 1. Turn the memory camcorder on. Slide the POWER switch downward to turn on the power. • Set the appropriate storage media :Internal Memory or Memory Card •... -
Page 55: Adjusting The Volume
When the multi-AV cable is connected to the memory camcorder, the built-in speaker will automatically turn off. • Depending on the amount of data to be played back, it may take some time for the playback images to appear. •... - Page 56 - Pressing the Control button ( frame by frame. - While playback is paused, press and hold the Control button to ( it plays back frame by frame just like slow motion playback. - To resume normal playback, press the OK button.
-
Page 57: Recording Options
CHANGING THE MENU SETTINGS You can change the menu settings to customize your memory camcorder. Access the desired menu screen by following the steps below, then change the various settings. 1. Slide POWER switch downward to turn the memory camcorder on. - Page 58 ✪ Follow the instructions below to use each of the menu items listed after this page. For example: setting the White Balance in Movie Record mode. 1. Slide the POWER switch downward to turn the memory camcorder on.
-
Page 59: Menu Items
MENU ITEMS • Accessible items in menu can vary depending on the operation mode. • For operation details, see the corresponding page. Menu items in Movie Record( Items Scene Mode (AE) White Balance Exposure Anti-Shake (EIS) Digital Effect Focus Back Light... -
Page 60: Recording Menu Items
Scene Mode (AE) This memory camcorder automatically sets the shutter speed and aperture according to the subject brightness for optimum recording: You can also specify one of five modes depending on subject conditions, recording environment or purpose of filming. item - Auto balance between the subject and the background. - Page 61 ) and the message "Set White Balance" are displayed. • 2. Frame a white object such as a piece of paper so that it fi lls the screen. Use an object that is not transparent. If the object that fi lls the screen is not focused, correct the focus using •...
- Page 62 Because the color temperature is different depending on the light source, the subject tint will differ depending on the white balance settings. Use this function for a more natural result. The white balance also can be set in the shortcut menu. ➥page 29.
- Page 63 If you manually change the exposure value when "Scene Mode(AE)" function is selected, manual changes • are applied first. Anti-Shake(EIS) (Electronic Image Stabilizer) When you use zoom to record a magnified subject image, it will correct fuzziness in the recorded image. item "Off" Disables the function.
- Page 64 The digital effect enables you to give a creative look to your recording. • Select the appropriate digital effect for the type of picture that you wish to record and the effect you wish to create. • There are 6 different digital effect options.
- Page 65 Be sure to zoom in on your subject before manually focusing on it. • If you bring the subject into focus at the "W" control side, focus will be faulty when you turn the zoom lever to the "T" control side to zoom in on the subject.
- Page 66 Back Light When subject is lit from behind, this function will compensate for lighting so that the subject is not too dark. item "Off Disables the function. - Backlight compensation is executed. "On" - Backlight compensation brightens the subject quickly.
- Page 67 (16:9 Wide/4:3). When it is set to "16:9 Wide", the displayed picture may appear wider or rougher than that of 4:3 screen aspect ratio. Quality You can select the quality of a movie to be recorded. This memory camcorder can record in the SF (super fine), F (fine) and N (normal) modes. item "Super Fine"...
-
Page 68: Digital Zoom
• You can select the maximum zoom level in case you want to zoom to a level greater than 34x (the default setting) during recording. Up to 34x zoom is performed optically, and after that, up to 1200x zoom is performed digitally. -
Page 69: Playback Options
You can manage recorded movie images in various ways. • Each thumbnail image shown in the display represents the fi rst frame of a separately recorded movie. • SETTING THE PLAY OPTION You can play all movies continuously or play the selected movie only. -
Page 70: Deleting Movie Images
While the menu or thumbnail image screen is displayed, pressing the • Recording start/stop button will move to Movie Record mode. It operates identically in the full image display (single image displayed on the screen). • Once deleted, a movie can not be restored. -
Page 71: Protecting Movie Images
It operates identically in the full image display (single image displayed on the screen). • Protected movie images will show the protection indicator ( • If the write protection tab on the memory card is set to lock, you cannot set image protection. • page 21 ) to select "Protect". - Page 72 • Movie images are copied to the destination storage while leaving original movie images in the source storage. • It copies from the currently-used memory to another. For example, if the built-in memory was used, it copies to a memory card.
-
Page 73: File Information
16:9 WIDE You can select the desired LCD display aspect ratio for recording or playback (16:9 Wide/4:3 aspect ratio). item Disables the function. Displays the image in 4:3 "Off" aspect ratio. Select to use the standard display aspect ratio of 4:3 on the screen. -
Page 74: Setting Options
Even if the menu item is displayed, some items cannot be set • depending on the selected mode (movie recording/playback, settings). In this case, the sub menu cannot be accessed or a setting cannot be changed. Button Tips a. MENU button : Use it to enter or exit the menu. -
Page 75: Setting Menu Items
You can setup the date/time, OSD language and display settings of the memory camcorder. SETTING MENU ITEMS Items Date/Time Set Date Format Time Format Date/Time LCD Brightness LCD Color Auto Power Off Beep Sound File No. Memory Type (SC-MX10A/MX10AU only) - Page 76 You can select the date format to display. settings "YY/MM/DD" The date is displayed in the order of year / month / date. "DD/MM/YY" The date is displayed in the order of date / month / year. "MM/DD/YY" The date is displayed in the order of month / date / year.
-
Page 77: Lcd Brightness
The "Auto Power Off" will not function when you connect the AC power adapter to the memory camcorder. • The "Auto Power Off" functions when the battery pack is the only power source. If you connect the camcorder to the USB device (PC, etc.) through USB cable, the "Auto Power Off" will not • function. - Page 78 "Reset" card. When you set "File No." to "Series", each file is assigned with a different number so as to avoid duplicating file names. It is convenient when you want to manage your files on a PC. Memory Type (SC-MX10A/MX10AU only You can record movie images on the built-in memory or a memory card, so you should select the desired storage media before starting recording or playback.
-
Page 79: Memory Info
It shows you the memory information of the inserted "Card" memory card. If there is no storage media inserted, it can not be selected and will be dimmed on the menu. In case of model SC-MX10/MX10P, the information of the memory card appears by selecting "OK". Format The format function completely delete all fi les and options on the storage media, including protected fi les. -
Page 80: Default Set
You can select a desired language to display the menu and messages. ➥page 30 USB Connect Connect the memory camcorder to a PC via a USB 2.0 cable and you can transfer your movie images from the storage media, or use this camcorder as a web camera. -
Page 81: Usb Interface
You can transfer a recorded file in storage media to a PC via a USB connection. • If you transfer data to a PC, you need to install the software (DV Driver, Video Codec, DirectX 9.0) supplied with the •... - Page 82 • transfer will stop and the data may be damaged. If you connect the USB cable to a PC using a USB HUB or with other devices at the same time, it may • cause conflict and may not work properly. If this occurs, remove all other USB devices and try the connection again.
-
Page 83: Installing The Software
- The setup screen appears automatically soon after the CD was inserted. If the setup screen does not appear, click on "Start" on the bottom left corner and select "Run" to display a dialog. Type "D:\autorun.exe" and then press ENTER, if your CD-ROM drive is mapped to "D:Drive". - Page 84 360-degree virtual reality (VR) scenes. CyberLink Power Director CyberLink Power Director is software for easily editing MPEG, AVI, and other video fi les, still images, and other contents • for creating a movie. This software has an interface that allows editing in either time line or storyboard mode, maintains superior image quality, uses SVRT for high-speed rendering, and has a host of other advanced video editing features.
-
Page 85: Connecting The Usb Cable
Disconnecting the USB cable Before loading or unloading recording mediums or turning off the PC, fi rst disconnect the USB cable and turn off the memory camcorder. After completing the data transmission, you must disconnect the cable in the following way: 1. -
Page 86: Viewing The Contents Of Storage Media
Structure of folders and fi les on the storage media • The folder and fi le structure for built-in memory or memory card is as follows. • Don’t arbitrarily change or remove the folder or fi le name. It may not be playable. Movie images fi le (1) The SD-quality movie images have SDV_####.AVI format. -
Page 87: Transferring Files From The Memory Camcorder To Your Pc
For more details of "Video Codec". ➥page 71 When playing back a file in the recording medium on your PC, copy the file to your PC, and then play it back. If video file is played back directly from recording medium (i.e. the memory camcorder is connected through USB to your PC), it may be not played back properly due to the inadequate processing speeds or other problems. -
Page 88: Using The Pc Cam Function
USB interface USING THE PC CAM FUNCTION You can use your memory camcorder as a PC camera for video chatting, video conference and other PC camera applications. Before you start! For PC Cam use, you must install the DV Driver. -
Page 89: Viewing On Tv Screen
- You can also monitor the image on the LCD screen of the memory camcorder. 3. Perform playback. You can perform playback, recording or make settings in the menu while viewing on your TV screen. When a copy-protected movie is played back, no image will appear on TV screen. -
Page 90: Recording (Dubbing) Images On Other Video Devices
(dub) it. Using S-VIDEO will deliver clearer images. • Be sure to use the AC adaptor to power the memory camcorder to prevent battery power from shutting off • during recording on another video device. - Page 91 Wipe gently with a soft dry cloth. Do not apply excessive force when cleaning, gently rub the surface. - Do not use benzene or thinner to clean the camcorder. The coating of exterior could peel off or the case could deteriorate.
-
Page 92: Additional Information
To clean the lens • Use an optional air blower to blow out dirt and other small object. Do not wipe the lens with cloth or your fingers. If necessary, wipe gently with lens cleaning paper. - Mold may form if the lens is left dirty. -
Page 93: Troubleshooting
TROUBLESHOOTING ✪ Before contacting a Samsung authorized service center, perform the following simple checks. They may save you the time and expense of an unnecessary call. Warning indicators and messages Power source Message Low Battery Auto Power Off Informs that... - Page 94 Not Formatted Recording Message Not Supported Format 82_English Informs that... There is not enough space to record on built-in memory. There is no memory card inserted in the card slot. There is not enough space to record on memory card.
- Page 95 • What can I do? Turn the power off and detach the battery pack, and leave it in a dry area for 1~2 hours before using it. • When does the dew condensation occur? When the device is relocated to a place with a higher temperature than the previous location, or when using it in a hot area suddenly, it will cause condensation.
-
Page 96: Symptoms And Solutions
• The inserted battery pack may be discharged. Charge the battery pack or replace it with a charged one. • If you use an AC power adaptor, make sure it is properly connected to the wall outlet. • Your memory camcorder has been left for more than 5 minutes without any button operation. - Page 97 - It can occur when recording or viewing a 16:9-ratio image on the LCD screen. For more details, see the display specifications. - If you want to display properly on your TV, check out your TV type and set the proper screen mode (4:3 aspect ratio).
- Page 98 86_English Explanation/Solution Insert a memory card into your camcorder properly. • If you use a memory card formatted on a computer, format it again directly • on your camcorder. page 67 ➥ The recorded images are protected. Remove protection from the files and •...
- Page 99 Explanation/Solution • Press the MODE button to set Movie Record mode ( • There is not enough free space to record on the built-in memory or memory card. • Check if the memory card is write-protected or if SDHC memory card is inserted.
- Page 100 This is not a malfunction. • "Date/Time" is set to "Off". Set the "Date/Time" to "On". On your camcorder, there may be a slight time delay between the point • when you press Recording start/stop button and the actual point where the recorded movie starts/stops.
- Page 101 The recording conditions are not suitable for auto focus. Adjust the focus • manually. page 53 ➥ The lens is dusty on the surface. Clear the lens and check the focus. • • Recording is being made in a dark place. Light up to brighten the place. •...
- Page 102 All movies recorded with this memory camcorder have 4:3 aspect ratio. So this happens when viewing recorded movies on a 16:9 wide screen TV. If you want to display properly on your TV, check out your TV type and set the proper screen mode (4:3 aspect ratio).
- Page 103 Macintosh computer. Explanation/Solution The multi-AV cable is not connected properly. Make sure that the multi-AV cable is connected to the proper jack, i.e. to the input jack of the device used for dubbing an image from your camcorder. ➥...
- Page 104 Check the system requirements to play a movie. Exit other all applications running on the current computer. Explanation/Solution Has the camcorder been left unused for a long period of time? The backup memory battery (button-type battery) may be discharged: replace it with a new one. page 20 ➥...
- Page 105 30% ~80% Storage temperature -20˚C ~ 60˚C (-4˚F ~ 140˚F) Dimensions (W x H x D) Approx. 2.36" x 2.46" x 4.76" (60mm x 62.5mm x 121mm) Weight Approx. 0.61Ibs (280g) (expect for battery pack or memory card) Internal MIC Omni-directional stereo microphone These technical specifications and design may be changed without notice.
- Page 106 SAMSUNG Electronics America Inc. (SEA), warrants that this product is free from defective material and workmanship. SEA further warrants that if product fails to operate properly within the specified warranty period and the failure is due to improper workmanship or defective material, SEA will repair or replace the product at it’s option.
- Page 107 If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care center. Region Country CANADA North America MEXICO U.S.A ARGENTINE BRAZIL CHILE COSTA RICA ECUADOR EL SALVADOR GUATEMALA Latin America JAMAICA PANAMA PUERTO RICO REP.
- Page 108 1-800-SAMSUNG (726-7864) www.samsung.com/us RoHS compliant Our product complies with “The Restriction Of the use of certain Hazardous Substances in electrical and electronic equipment”, and we do not use the 6 hazardous materials- Cadmium(Cd), Lead (Pb), Mercury (Hg), Hexavalent Chromium (Cr +6), Poly Brominated Biphenyls (PBBs), Poly Brominated Diphenyl Ethers(PBDEs)- in Code No.