To test the connection, press the ▼ button
12.
to select Network Test, and then press the
ENTER button.
Setting Up the Wireless Network Connection
- Manual
If the Auto Setting does not work, you need to
enter the Network settng values manually.
To get the Network setting values from most
Windows computers, follow these steps:
Right click the Network icon on the bottom
1.
right of the screen.
In the pop-up menu, click Status.
2.
On the dialog that appears, click the Support
3.
tab.
On the Support tab, click the Details button.
4.
The Network settings are displayed.
To Enter the Network settings into your player,
follow these steps:
On the Internet Protocol Setup screen, press
1.
the ENTER button.
Press the ▲▼ buttons to select Manual, and
2.
then press the ENTER button.
Press the ▼ button to go to the first entry field
3.
(IP Address).
Settings
Network Settings
Display
Access Point Selection : Not Selected
\
Audio
Internet Protocol Setup : Manual
System
IP Address
: 0
0
0
0
Network
: 255 255 255
0
Subnet Mask
Language
Gateway
: 0
0
0
0
Security
DNS
: Manual
General
DNS Server
: 0
0
0
0
Support
PBC (WPS) > Move " Select ' Return
a
Use the number buttons to enter numbers.
4.
When done with each field, use the ► button
5.
to move successively to the next field.
You can also use the other arrow buttons to
move up, down, and back.