Press the ◄► buttons to the select the
5.
desired Network Settings: Wired, Wireless or
PBC (WPS), then press the ENTER button.
(See pages 36~39)
The Network Test will start and Initial Settings
will be completed.
Press the OK button.
6.
The home menu will be displayed. (For more
information about home menu, please see
page 29)
•
Home Menu
Please activate Internet@TV service
You Tube
internet radio
to enjoy a variety of Internet Services.
No Disc
a Change Device
d View Devices
" Enter
NOTE
▪
When the player is connected to TV for the first time,
player will turn on automatically.
Do not confuse because this is not malfunction.
▪
The home menu will not be displayed if you do not
configure the initial settings.
▪
If you press the BLUE(D) button during the network
setup, you can access the home menu even if the
network setup is not completed yet.
▪
When you return to home menu, the full screen
mode will be cancelled automatically.
▪
If you want to display Initial Setting screen again
in order to make changes, press the STOP (
)
button on the front panel of the player for more than
5 seconds with no disc inserted.
▪
Use the HDMI cable to connect the player to an
Anynet+(HDMI-CEC)-compliant Samsung TV.
If the TV uses a language supported by the player,
that language will be set to a preferred language
automatically.
However, the Anynet+(HDMI-CEC) feature should
be set to On in both TV and the player.