Guidelines For Using Paper - Samsung SCX-4216F User Manual

Paper
Minimum size (custom)
Maximum size (Legal)
Transparency
Labels
Cards
Envelopes
*. The machine supports a wide range of media sizes. See "Size, Input Sources and Capacities" on
page 3.2.
**. Capacity may vary depending on print materials' weight and thickness, and environmental conditions.
N
: You may experience jams when using print materials with a length of less than
OTE
127 mm (5 in.). For optimum performance, ensure that you are storing and handling the
paper correctly. Please refer to "Printer and Paper Storage Environment" on page B.9.

Guidelines for Using Paper

For the best result, use conventional 75 g/m
of good quality, and free of cuts, nicks, tears, spots, loose particles, dust, wrinkles,
voids, and curled or bent edges.
If you are unsure of what type of paper you are loading, such as bond or recycled
paper, check the label on the package.
The following problems may cause print quality deviations, jamming or even damage
to the printer:
Symptom
Poor print quality or toner
adhesion, problems with
feeding
Dropout, jamming, curl
Increased gray background
shading/printer wear
Excessive curl problems with
feeding
Jamming, damage to printer
Problems with feeding
*
Dimensions
76 x 127 mm
(3 x 5 in)
216 x 356 mm
(8.5 x 14 in)
Same minimum and
maximum paper sizes
as listed above.
2
(20 lb) paper. Ensure that the paper is
Problem with Paper
Too moist, too rough, too
smooth or embossed; faulty
paper lot
Stored improperly
Too heavy
Too moist, wrong grain
direction or short-grain
construction
Cutouts or perforations
Ragged edges
Weight
2
60 to 120 g/m
bond (16 to
32 lb)
• 1 sheet of paper
2
138 to 146 g/m
2
120 to 150 g/m
2
90 to 163 g/m
2
75 to 90 g/m
Solution
Try another kind of paper,
between 100 ~ 400 Sheffied,
4 ~ 5 % moisture content.
Store paper flat in its
moisture-proof wrapping.
Use lighter paper, use the rear
output slot.
• Use the rear output slot.
• Use long-grain paper.
Do not use paper with cutouts
or perforations.
Use good quality paper.
S
PECIFICATIONS
**
Capacity
for the Bypass
tray
B.7
B