Samsung SCX-4216F User Manual page 138

Condition
Vertical lines
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
Gray background
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
Toner smear
Vertical repetitive
defects
AaBbCc
AaBbCc
AaBbCc
AaBbCc
AaBbCc
Suggested solutions
If black vertical streaks appear on the page:
• The drum inside the toner cartridge has probably been
scratched. Install a new toner cartridge. See "Installing the
Toner Cartridge" on page 1.10.
If the amount of background shading becomes unacceptable:
• Change to a lighter weight pages. See "Paper Specifications"
on page B.6.
• Check the machine's environment; very dry (low humidity) or
high humidity (higher than 80% RH) conditions can increase
the amount of background shading.
• Remove the old toner cartridge and install a new one. See
"Installing the Toner Cartridge" on page 1.10.
• Clean the inside of the machine. See page 7.3.
• Check the paper type and quality. See "Paper Specifications"
on page B.6.
• Remove the toner cartridge and install a new one. See
"Installing the Toner Cartridge" on page 1.10.
If marks repeatedly appear on the printed side of the page at
even intervals:
• The toner cartridge may be damaged. If a repetitive mark
occurs on the page, print a cleaning sheet several times to
clean the cartridge; see "Cleaning the Drum" on page 7.10.
After the printout, if you still have the same problems, install
a new toner cartridge. See "Installing the Toner Cartridge" on
page 1.10.
• Parts of the machine may have toner on them. If the defects
occur on the back of the page, the problem will likely correct
itself after a few more pages.
• The fusing assembly may be damaged. Contact a service
representative.
T 8.19
ROUBLESHOOTING
8