Printing Problems - Samsung SCX-4216F User Manual

Printing Problems

Condition
The machine The machine is not
does not print. receiving power.
The machine is not
selected as the default
printer.
Check the machine for
the following:
The connection cable
between the computer
and the machine is not
connected properly.
The connection cable
between the computer
and the machine is
defective.
The port setting is
incorrect.
The machine may be
configured incorrectly.
The printer driver may
be incorrectly installed.
The machine is
malfunctioning.
The machine The paper source
selects print selection in the printer
materials from properties may be
the wrong incorrect.
paper source.
Possible cause Suggested solutions
Check the power cord connections. Check
the power switch and the power source.
Select Samsung SCX-4x16 Series as your
default printer in your Windows.
• The front or rear cover is not closed.
• Paper is jammed.
• No paper is loaded.
• The toner cartridge is not installed.
If a printer system error occurs, contact
your service representative.
Disconnect the printer cable and reconnect
it.
If possible, attach the cable to another
computer that is working properly and print
a job. You can also try using a different
printer cable.
Check the Windows printer setting to make
sure that the print job is sent to the correct
port, for example, LPT1. If the computer
has more than one port, make sure that the
machine is attached to the correct one.
Check the printer properties to ensure that
all of the print settings are correct.
Remove the printer driver and then reinstall
it; see page 2.10 and page 2.5 respectively.
Check the display message on the control
panel to see if the machine is indicating a
system error.
For many software applications, the paper
source selection is found under the
tab within the printer properties. Select the
correct paper source. See page 5.8.
T
ROUBLESHOOTING
Paper
8
8.15