Advertisement
HOW TO USE YOUR FOOTBATH
1. Remove Footbath and all accessories from box.
2. Remove plastic covering from plug and unwrap cord.
IMPORTANT: Ensure that the unit is unplugged before filling with
water. Do not fill past the MAX fill line.
3. Fill Footbath with 1.5 inches of warm water. Do not overfill.
4. Select the Massage Center Attachment that you wish to use and
place it in the Massage Center.
5. Place Footbath at the base of a sturdy chair and plug into standard
120V electrical outlet.
NOTE: Footbath will only maintain the temperature of the
water used. It will not heat cold water. For a warm water
massage, please fill the unit with warm water.
NOTE: Heat should be pleasant and comfortable. Should
pain or discomfort result, discontinue use and consult
your physician.
NOTE: Do not use unit for more than 20 minutes at a time.
6. Turn the Function Dial to indicate the massage of your choice:
0 = OFF
1 = Massage
2 = Massage + Heat
7. Sit in a sturdy chair and slowly place your feet in Footbath.
8. Enjoy massage. Enhance your massage experience by slowly
rubbing your feet along the Massage Rollers.You may massage
specific areas of your feet with the Massage Node.
9. When finished, turn Control Dial to OFF and unplug the unit. Hold
unit over capable drain and tip the Footbath, allowing water to spill
out along one of the Drainage Grooves. NEVER allow water to
come into contact with the Control Dial.
7
Advertisement
