Advertisement
Quick Links
OPERATOR'S MANUAL
2 CYCLE GASOLINE POWERED
RECIPROCATING SAW
MODEL NO. EJ101
Length of stroke
Strokes per minute
Length (without blade)
Engine Type
Displacement
Starting System
Carburetor
Fuel Tank Capacity
Net weight
For Questions, Call 1-800-525-2579 in the U.S. or 1-800-265-6778 in Canada
SAVE THIS MANUAL FOR FUTURE REFERENCE
SPECIFICATIONS:
Air Cooled 2 Cycle Gasoline Engine
www.ryobi.com
1 in. (25.4mm)
0-2000 spm
17 in. (430 mm)
15.9 cc
Recoil
Diaphram
0.35 literes
11 lbs.
Advertisement
Related Manuals for Ryobi EJ101
Summary of Contents for Ryobi EJ101
- Page 1 OPERATOR'S MANUAL 2 CYCLE GASOLINE POWERED RECIPROCATING SAW MODEL NO. EJ101 Length of stroke Strokes per minute Length (without blade) Engine Type Displacement Starting System Carburetor Fuel Tank Capacity Net weight For Questions, Call 1-800-525-2579 in the U.S. or 1-800-265-6778 in Canada...
- Page 2 Exploded View and Repair Parts List ... 2 THANK YOU Thank you for purchasing this quality product. Your new saw has been engineered and manufactured to Ryobi's high standard for dependability, ease of operation, and operator safety. Properly cared for, it will provide many hours of useful service.
- Page 3 CALIFORNIA EMISSION REGULATIONS The engine of your mixer meets the 1995 to 1998 California emissions regulations. To ensure that your unit continues to meet these regulations, refer to the following information and instructions in this operator's manual. These units are identified by the label on the engine of your product.
- Page 4 RULES FOR SAFE OPERATION THE PURPOSE OF SAFETY SYMBOLS IS TO ATTRACT YOUR ATTENTION TO POSSIBLE DANGERS. THE SAFETY SYMBOLS, AND THE EXPLANATIONS WITH THEM, DESERVE YOUR CAREFUL ATTENTION AND UNDERSTANDING. THE SAFETY WARNINGS DO NOT BY THEMSELVES ELIMINATE ANY DANGER. THE INSTRUCTIONS OR WARNINGS THEY GIVE ARE NOT SUBSTITUTES FOR PROPER ACCIDENT PREVENTION MEASURES.
- Page 5 RULES FOR SAFE OPERATION READ ALL INSTRUCTIONS KNOW YOUR POWER TOOL - Read operator's manual carefully. Learn its applications and limita- tions as well as the specific potential hazards re- lated to this tool. KEEP GUARDS IN PLACE and in working order. KEEP WORK AREA CLEAN.
-
Page 6: Save These Instructions
DRUGS, ALCOHOL, MEDICATION. Do not oper- ate tool while under the influence of drugs, alcohol, or any medication. WHEN SERVICING USE ONLY IDENTICAL RYOBI REPLACEMENT PARTS. WARNING: TO AVOID POSSIBLE SERIOUS IN- JURY, KEEP HANDS AND FINGERS FROM BE- TWEEN THE MOTOR HOUSING AND SAW BLADE CLAMP. - Page 7 RULES FOR SAFE OPERATION • Use only genuine Ryobi replacement parts when servicing this unit. These parts are available from your authorized service dealer. Do not use parts, accessories or attachments not authorized by Ryobi for this unit. Doing so could lead to serious injury to the user, or damage to the unit, and void your warranty.
- Page 8 Inspect it carefully to make sure no breakage or damage has occurred during shipping. If any parts are damaged or missing, contact your nearest Ryobi dealer to obtain replacement parts before attempting to operate saw. A blade pack, spark plug wrench, 4 mm hex key, operator's manual, and warranty registration are also included.
- Page 9 By doing this you will get a smoother faster cut and prolong blade life. Replacement blades for this saw are available from your nearest Ryobi dealer. Page 9...
- Page 10 Do not mix them directly in the engine fuel tank. See the table below for specific gas and oil mixing ratios. NOTE: One gallon (3.8 liters) of unleaded gasoline mixed with one 4 oz. (120 ml.) bottle of RYOBI 2 CYCLE OIL makes a 32:1 fuel/oil ratio. UNLEADED GAS 1 US GALLON + 4.0 FL.
- Page 11 STARTING/STOPPING INSTRUCTIONS PREPARING FOR OPERATION 1. Mix gas with oil. Fill fuel tank with fuel/oil mixture. See Oil and Fuel Mixing Instructions on previous page. 2. Do not overfill or spill fuel. 3. Replace gasoline cap on gas tank. Make sure it is securely tightened before attempting to start engine.
- Page 12 WARNING: The engine of your saw should never be running when you are installing or removing blades. Stop the engine and let it cool to prevent accidental contact with the blade, muffler, etc. that could cause serious injury. Disconnect the spark plug to make sure the saw will not start.
- Page 13 GENERAL CUTTING See Figure 7. Hold your saw firmly in front of and clearly away from you. Make sure saw blade is clear of any foreign material. Be sure material to be cut is held firmly. Small work pieces should be securely clamped in a vise or with clamps to the work bench or table.
- Page 14 WARNING: When servicing use only identical Ryobi replacement parts. Use of any other parts may create a hazard or cause product damage. NOTE: Some maintenance procedures may require special tools or skills. If you are unsure about these procedures take your unit to an authorized service center.
- Page 15 AIR FILTER MAINTENANCE See Figure 12. WARNING: To avoid serious personal injury, always turn your saw off and allow it to cool before you clean or do any maintenance on it. 1. Using a small phillips screwdriver, loosen and remove the air filter cover screws (2) and air filter cover.
- Page 16 CARBURETOR ADJUSTMENT See Figure 10. The carburetor on your saw has been factory set. After extended use of your saw adjustments may be required. The high speed needle has been permanently set from the factory at 1-1/4 turns counterclockwise from the closed position.
- Page 17 • Store the unit out of the reach of children. 2 – Cycle Oil Spark Plug Fuel Cap Ryobi CLEANING AND STORAGE LONG TERM STORAGE If the unit will be stored for an extended time, use the following storage procedure.
- Page 18 ENGINE WILL NOT START CAUSE On/Off Switch is in OFF position Empty fuel tank Primer bulb wasn't pressed enough Engine flooded Old or improperly mixed fuel Fouled spark plug ENGINE WILL NOT IDLE CAUSE Air Filter is Plugged Old or improperly mixed fuel Improper carburetor adjustment ENGINE WILL NOT ACCELERATE CAUSE...
- Page 19 NOTES Page 19...
-
Page 20: Reciprocating Saw
Ryobi Authorized Service Center. Be sure to provide all pertinent facts when you call or visit. Please refer to the insert or call 1-800- 525-2579 in the United States or 1-800-265-6778 in Canada for your nearest Ryobi Authorized Service Center.