Rowenta 42449 Instructions For Use Manual

Expertise steam generator

Advertisement

Quick Links

042449 - 27/05
Instructions for use

Advertisement

Table of Contents
loading

Summary of Contents for Rowenta 42449

  • Page 1 042449 - 27/05 Instructions for use...
  • Page 2: Control Panel

    (depending on the model) 3. Humid steam button (depending on the model) 4. Steam control button 5. Temperature control dial for iron soleplate 6. Iron temperature control light Steam generator boiler (in the base unit) 8. Cord fastener Control panel Green “steam...
  • Page 3: Using Your Steam Generator

    2. PREPARING YOUR STEAM GENERATOR 1. Place your steam generator on a stable, horizontal heat-resistant work surface. 2. Remove the water tank by pulling the handles upwards (1). 3. Fill the water tank taking care not to exceed the maximum level (2). 4.
  • Page 4: Operating The Control Panel

    Cotton/Linen (high temperature)) 2. The iron temperature control light turns on. Be careful ! the steam generator is ready when the iron temperature control light goes out and when the green « steam ready » light stays continuous. 3. Adjust the steam output control dial located on the control panel (7), eg : less steam for low temperatures.
  • Page 5 Recommendations: To prime the steam circuit, either before using the iron for the first time, or if you have not used the steam function for a few minutes, press the steam control button several times in a row, holding the iron away from your clothes.
  • Page 6: Vertical Steam Ironing

    7 • VERTICAL STEAM IRONING 1. Set the iron temperature control and the steam output control dial (located on the control panel) to the maximum position. 2. Hang the garment on a coat hanger and hold the fabric slightly taut with one hand.
  • Page 7 • Never hold the iron or the base unit under the tap. • Do not place the iron on a metal rest as this could damage it. Place it on the iron rest on the base unit : it has non-slip pads and has been designed to with- stand high temperatures.
  • Page 8 Before attempting to rinse the boiler of your generator, it is essential to leave it to cool for at least 2 hours in order to avoid any risk of scalding. If the orange “boiler rinse” light flashes, you can continue ironing normally but remember to rinse the boiler first, the next time that you use it.
  • Page 9 2. Place the iron on the iron rest plate. 3. Press the cord reel button and guide the cord with your hand (20) 4. Leave the iron (and the iron rest) to cool down for 30 minutes. 5. You can now put your steam generator away.
  • Page 10: Safety Recommendations

    • The appliance must be used and placed on a stable, heat-resistant work surface. • When you place the iron on the iron rest, make sure that the surface on which you place it is stable. • Completely unwind the power cord from its storage space before connecting to an earthed socket.
  • Page 11: Is There A Problem

    If you have any product problems or queries with your product, please telephone our Customer Relations team on : 0845 602 1454 (UK) (Calls charged at local rate) - (01) 4751947 (Ireland) Consult our web site : www.rowenta.co.uk ENVIRONMENT PROTECTION FIRST ! Your appliance contains valuable materials which can be recovered or recycled.
  • Page 12 042449 - 27/05...

Table of Contents