Roland XV-3080 Owner's Manual page 77

* Make sure that the [1-8/9-16] button's indicator is not lit. If
the indicator is lit, press [1-8/9-16] to turn it off.
2. Press [
] or [ ] to move the cursor to the
parameter you wish to set, and turn the VALUE dial or
press [INC] or [DEC] to select the following values.
Output Assign Chorus
MFX: 100 0
The output level can be set to any value you wish other than
0.
3. Press [
] / [ ] to choose the MFX OUT page.
4. Press [
] / [ ] to move the cursor to the
parameter you wish to set, and turn the VALUE dial or
press [INC] / [DEC] to select the following values.
Output Dry
OUTPUT B 100
Finally, set up Part 3.
1. Press [
] / [ ] to select the PART OUTPUT page.
2. Press PART SELECT [3/11] to make its indicator light.
* Make sure that the [1-8/9-16] button's indicator is not lit. If
the indicator is lit, press [1-8/9-16] to turn it off.
3. Press [
] / [ ] to move the cursor to the
parameter you wish to set, and turn the VALUE dial or
press [INC] / [DEC] to select the following values.
Output Assign Chorus
INDIV 5: 100 0
The output level can be set to any value you wish other than
0.
4. Press [EXIT] to return to the PERFORM PLAY page.
Reverb
0
Chorus Reverb
0 0
Reverb
0
Chapter 3 Selecting Output Jacks
77