Roland VXpanded VS-880 Owner's Manual page 25

Lo-Fi Processor
This allows you to create a Òlo-fiÓ sound by lowering the sample rate and/or decreasing the num-
ber of bits. Realtime modify filters connected in series allow you to reshape the sound freely.
Input L
Lo-Fi
Processor
Lo-Fi
Processor
Input R
LFP (Lo-fi processor)
LoFiPros Off, On
PreFilt Off, On
Rate Off, 1/2Ð1/32
Bit Off, 15Ð1 bit
PostFilt Off, On
0Ð100
EFLevel
DiLevel 0Ð100
LoFiPros (Lo-fi processor)
Turn the Lo-fi Processor on/off. If this is turned off, the following items will not be displayed.
PreFilt (Pre filter)
This filter decreases digital distortion. By turning this off, you can create an extremely lo-fi sound
that includes aliasing.
Rate
Modify the sample rate. If this is turned off, the sample rate will be the same as the sample rate of
the currently selected song.
Bit
Modify the number of data bits. If this is turned off, the number of data bits will be unchanged.
If an extremely low number of bits is selected, loud noise may appear even when there is no sound,
depending on the input source. In such cases, raise the threshold of the noise suppressor.
PostFilt (Post filter)
This filter decreases the digital distortion produced by lo-fi. By turning this off, you can create an
extremely lo-fi sound.
EFLevel (Effect level)
Adjust the volume of the lo-fi sound.
DiLevel (Direct level)
Adjust the volume of the direct sound.
Chapter 1 Trying out the expanded functions
Realtime Noise
Modify Filter Suppressor
Realtime Noise
Modify Filter Suppressor
Output L
Output R
25