About The Volume Knob; Turning The Power On And Off; Connecting Headphones - Roland pt-2000 Owner's Manual

Roland owner's manual digital piano pt-2000
Table of Contents

Advertisement

Before You Play

About the Volume knob

The VOLUME knob adjusts the overall
volume.
The VOLUME knob is located at the far left of the
piano's lower panel.
fig.2-05.e
Max
Volume
Min
* The VOLUME knob "clicks" to make the knob easy to stop
when center position is reached.
* To protect your ears when using headphones for extended
periods, take care not to listen at excessively high volume.

Turning the Power On and Off

* Once the connections have been completed, turn on power to
your various devices in the order specified. By turning on
devices in the wrong order, you risk causing malfunction and/or
damage to speakers and other devices.
Turning On the Power
1. Before switching the power on, turn the
volume all the way down.
fig.2-07.e
2. Press the [Power] switch.
fig.2-08.e
Lower position
Several seconds after the power is turned on, the
keyboard will produce sound when played. Adjust the
volume appropriately.
* This unit is equipped with a protection circuit. A brief interval
(a few seconds) after power up is required before the unit will
operate normally.
8
Volume
Min
ON
Turning Off the Power
1. Before switching the power off, turn the
volume all the way down.
fig.2-07.e
2. Press the [Power] switch.
fig.2-09.e
Upper position
The power is turned off.

Connecting Headphones

The pt-2000 features two headphone jacks. This allows two
people to listen through headphones simultaneously, making
it very useful for lessons and when performing piano pieces
for four hands. Additionally, this allows you to play without
having to worry about bothering others around you, even at
night.
1. Connect the headphones to either of the
headphone jacks on the underside of the
pt-2000, on the left.
Sound will no longer be heard from the pt-2000's
speakers.
2. Adjust the headphones volume with the pt-
2000's Volume knob.
fig.2-06.e
Max
Min
Phones
Precautions to Take When Using
Headphones
* To avoid damaging or severing the headphone cord, be sure to
handle the headphones by holding the phones themselves, and
grasping the plug and not the cord when pulling the headphone
plug.
* Connecting the headphones when the volume of connected
equipment is turned up may result in damage to the
headphones. Connect the headphones only after turning the
volume down completely.
* Listening at excessively high volume levels will not only damage
the headphones, but may also cause hearing loss. Listen at
appropriate levels.
Volume
Min
OFF

Advertisement

Table of Contents
loading

Table of Contents