Design Features - Rockford Fosgate 125.2 Operation & Installation

D F
ESIGN EATURES
1. Cast Aluminum Heatsink – The cast aluminum heatsink of the Punch
amplifier dissipates heat generated by the amplifier's circuitry. The
inherent advantage of casting provides a 30% improvement of cooling
over conventional extrusion heatsink designs.
2. End Caps – The unique end caps conceal the wiring and input cables,
giving the amplifier a clean "stealth" look.
3. Speaker Terminals – The heavy duty, gold-plated terminal block
connectors (+ and –) will accept wire sizes from 8 AWG to 18 AWG.
These gold-plated connectors are immune to corrosion that can cause
signal deterioration.
4. Power Terminals – The power and ground connectors on the Punch
amplifier are gold-plated and will accommodate up to 8 AWG wire
maximizing the input current capability of the amplifier.
5. REM Terminal – This gold-plated spade terminal is used for the auto
power/remote turn on of the Punch amplifier.
6. RCA Input Jacks – The industry standard RCA jacks provide easy
connections for signal level input. They are gold-plated to resist the
signal degradation caused by corrosion.
3 8 7
Speaker
+ L –
Left
Treble
Gain
9 5
LED
REM
– 5 –
6 6
7
8
Left Right Right
Bass
Input Input Gain
4
B+ GND
3
Speaker
+ R –