Starting The Machine - Ricoh aficio 1013F Operating Instructions Manual

Ricoh operating instructions printer/fax/scanner/copier 1013, 1013f
Hide thumbs Also See for aficio 1013F:
Table of Contents

Advertisement

Basics

Starting the Machine

A A A A
Press the operation switch to make the On indicator go on.
1
The display panel will come on.
Note
❒ If the power is not turned on when the operation switch is pressed, check
if the main power switch is on. If off, turn it on.
❒ During the warm-up period (less than 20 seconds), you can use the Auto
Start function. See p.31 "Auto Start".
❒ You can set up a copy job and press the { { { { Start} } } } key while the "Select Modes
and Press Start" message is displayed.
❒ When "Input User Code and Press OK" is displayed, enter your user code.
Shutting Down the Machine
A A A A
Press the operation switch to make the On indicator go off and change to
Low Power mode.
Turning Off the Main Power
A A A A
Turn off the main power switch.
The main power indicator of the control panel goes off.
Important
❒ Fax files stored in memory will be lost 12 hours after you turn the main
power switch off or you unplug the power cord.
8

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aficio 1013

Table of Contents