Samsung HG32NE460S Quick Setup Manual

Quick Setup Guide
To register this product please visit
www.samsung.com/register.
-02
List of Parts
1
2 3
4
Remote Control (AA59-00817A) & Owner's Instructions Wall Mount Adapter
Power Cord
Batteries (AAA x 2) Safety Guide (Depending on the model)
Installing the LED TV Stand
Components
When installing the stand, use the provided components and parts.
◆ HG32NE460
A
B C
• Stand • Guide Stand
C
1 2
B
X4 (M4 X L12)
A
Attention
DO NOT USE DO NOT USE DO NOT USE
CHEMICALS GREASE OIL
C
3
X4 (M4 X L14)
✎ Place a soft cloth over the table to protect the TV, and
then place the TV on the cloth screen-side down.
✎ Insert the Stand Guide into the slot on the bottom of
the TV.
✎ Slide and assemble it to the end line in the direction
✎ Tight the bottom of the screw first, and stow the upper side of screw last.
of arrow.
✎ Progress the assembly of screw in the manual's order.
◆ UI Scenario
Setup Complete!
Your TV is now ready to use.
Self Diagnosis for TV
Self Diagnosis for HTV
SW Update
Service Pattern OFF
ATV cable AGC Gain Default
If you select TV Reset, the TV resets all
DTV OpenCable AGC Gain Default
values to their factory defaults and then
Done
Sound Bar Out OFF displays the Hospital Plug & Play menu.
Contact Samsung Go to the first Hospital Plug & Play
Standby LED screen below.
ON
TV Reset
Complete cloning and next
P
Region Settings
Clone Settings
Change the region settings if you are located in North Clone system settings from a USB flash drive to your TV. Skip this step if you want to clone system Set options regarding the selected solution.
America, Latin America, or Europe. Your TV might not function if the
region settings are not correctly congigured. When the region settings from a server.
settings are changed, your TV will automatically restart to apply them. Country List
Room Number
NONE USA
c US Group
KOR Group ID
SD_MEXICO A USB flash drive is mot connected. Please check and try again.
SD_CANADA
Clone from USB
if you choose
Standalone or
Interactive
if you choose
LYNK REACH
if you TV Installation Type Select Solution
select
Select your TV installation type. Select a solution to install on your TV.
Factory
Menu
c TV Basic Setup Start basic setup to use c Standalone (Home Menu) Select if you do not want
your TV. to connect to a specific
solution and only want
Cloning Mode LYNK REACH to use the TV.
Factory Menu if you choose Interactive (STB)
Commercial TV Mode Cloning Mode
If you select TV Basic
Setup or Commercial
TV Mode
Select your Language age Configure your TV
Select your language to start the on screen setup. Select your information in all of the categories To get channels, set the options below then select
Choose a picture mode
below. Scan.
that best suits your
c English Picture Mode Standard viewing enviroment. Antenna
Español
Digtal Cable System
Français
Analog Cable System
Press the arrow buttons Press the arrow buttons
to move around the
screen.
Press the Enter button to
select.
Select the channel
Select your language Select Picture mode
band to use for Auto
Program
Setup Complete!
Standalone
Auto Program is
Air 21
Your TV is now ready to use.
Hospitality Option Menu
DTV Air
appears. Air
DTV Cable
Cable
Done
After Searching
Press Power OFF to exit.
channels.
Clock
Select whether to apply daylight saving time
Set current date and time Auto Program complete.
156 channels are memorized
Clock settings Auto
DTV Air
Date -- / -- / ---- Air
complete setup and use your Time -- : -- -- DTV Cable
TV if you select Commercial TV DST Off Cable
Mode before Time Zone Eastern
-- : -- --
Select Clock Mode, DST, and your Time Zone
HE460_ZX_QSG_BN68-07996M-02_L02.indd 1
◆ HG40NE460
STOP
A B
1EA
Please do not return 2EA
this unit
• Stand • Guide Stand
If you are having problems operating this TV,
Please call;
US: 1-866-894-0524
CANADA: 1-800-726-7864
For web support please visit
1 2
http://www.samsung.com/us/business
5
4 5
Holder-Wire stand (32")
✎ Make sure to distinguish between the front and back of the Stand and Stand Guide when connecting them.
✎ Make sure that at least two people lift and move the LED TV.
✎ When connecting the stand, lay the product down on a soft surface, with the screen facing down, and then fasten the screws.
✎ The number of screws may differ depending on the model.
TV Controller
X 8 (M4 X L14)
The TV's Controller on the bottom right side of the TV, lets you control the TV without the remote control.
• Screws
Control Menu
: Turns the TV on or off.
/
/
: Displays and selects the available video sources.
Remote control sensor/TV Controller
✎ If you press it first, the control menu appears. You can select the function by pressing and holding the TV's controller.
✎ The product color and shape may vary depending on the model.
✎ With the TV's Controller, you cannot perform other operations except for turning the TV on or off, changing the channel,
adjusting the volume, and switching the input source.
Standby mode
Your TV enters Standby mode when you turn it off and continues to consume a small amount of electric power. To be safe and to
decrease power consumption, do not leave your TV in standby mode for long periods of time (when you are away on vacation, for
example). It is best to unplug the power cord.
Wall Mount Kit Specifications (VESA)
Wall mount
Bracket
Solution Setup
Enter The room number.
Only numbers and
All English letters can be
entered.
Before installing any other wall mounting kit, assemble the wall mount adapter provided separately with the TV.
Install your wall mount on a solid wall perpendicular to the floor. If you are attaching the wall mount to building materials other
than plaster board, contact your nearest dealer. If installed on a ceiling or slanted wall, the TV may fall and cause severe personal
injury.
Standard dimensions for wall mount kits are shown in the table below.
➣
➣ Samsung wall mount kits contain a detailed installation manual. All parts necessary for assembly are provided.
Do not use screws that do not comply with the VESA standard screw specifications.
➣
Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw specifications.
➣
Screws that are too long may cause damage to the inside of the TV set.
For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ
➣
depending on the wall mount specifications.
➣ Do not fasten the screws too firmly. This may damage the product or cause the product to fall, leading to personal injury.
Samsung is not liable for these kinds of accidents.
Auto Program
Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the
➣
Select current connected consumer fails to follow the product installation instructions.
antenna.
Both
STD
➣ Do not mount the TV at more than a 15 degree tilt.
STD
Always have two people mount the TV onto a wall.
➣
Scan
VESA screw hole
TV size in
Product Family specs (A * B) in Standard Screw
inches
millimeters
Auto Program
LED-TV 32-40 200 × 200 M8
channels for you...
6%
0
0
Do not install your Wall Mount Kit while your TV is turned on. This may result in personal injury due to electric shock.
0
0
Stop
Auto Program
0
12
82
62
Change Settings Scan Again
Viewing the Connection Panel
The product color and shape may vary depending on the model.
➣
C
x4(M4 X L12)
AV IN
• Screws HDMI IN 2
1 AV IN (DVI)
EX-LINK
5
1 HDMI IN 2 (DVI)
EX-LINK
2
6 5
AUDIO
OUT
3
3 2
6
3
AUDIO
HDMI IN OUT
3 2 (ARC)
4
3
HDMI IN
4 2 (ARC)
x4
C
(M4 X L12)
HDMI IN 2
(ARC)
HDMI IN 2 2
1 (5V 0.5A) (DVI)
6 /CLONING
HDMI IN 2
(ARC)
2 1 HDMI IN 2 HDMI IN 1 (DVI) 2
(5V 0.5A) /CLONING (DVI)
4
AV IN
2 HDMI IN 1 AUDIO EX-LINK
(DVI) OUT
4
3 AV IN
AUDIO EX-LINK
OUT
!
! 3
! ! 5
!
5
!
Notice
When in Hotel mode (Interactive or Standalone), all Channel menu items in the Menu OSD except for the Channel List
are deactivated. If you need to change the channel line up, use the Channel Setup item in the Hotel options menu.
Sound Bar
◆ Samsung Sound-Bars and Hotel TVs in 2016
1. Samsung Sound-Bars and hospitality TVs support the ARC feature in HDMI 1.4. If you connect a compatible Samsung
Sound-Bar to a compatible Samsung hospitality TV using a single HDMI cable, guests can listen to the TV's sound through
the Sound-Bar.
2. The item of Sound bar Out in Hospitality Option Menu makes you control to where the TV sound is outputted when the TV is
turned on.
– If Sound bar Out is On, the TV sound is automatically outputted in the Sound Bar device only whenever TV is turned on.
– If Sound bar Out is Off, the TV sound is automatically outputted in the TV speaker only whenever TV is turned on.
3. Models supporting the ARC function are listed below:
– Sound-Bars: HW-E350/E450/E550
HW-F350/F355/FM35/F450/FM45/FM45C/ F550/F551/FM55/FM55C/F750/F75
◆ Setting the Sound-Bar to Hotel Mode.
: Changes channels.
4. Set the following Hotel menu options:
: Adjusts the volume. – Hotel option > System > Sound Bar Out = On.
– Hotel option > Power On > Power On Volume = User Defined.
– Hotel option > Power On > Power On Volume Num > Set greater than 0.
– Hotel option > Power On > Max Volume > Set greater than 0.
5. Connect an HDMI cable from the HDMI OUT jack at the back of the Sound-Bar to the HDMI2 port (supporting ARC) on the
hospitality TV.
6. After the Sound-Bar is connected to the hospitality TV, when the TV turns on, the Sound-Bar automatically detects the TV,
and then automatically switches to Hotel Mode.
Sound Bar Hotel mode functional characteristics:
– Power On/Off is synchronized with the TV
– HDMI_CEC defaults to On
– Functions through the "HDMI OUT" port only
– Disables the "Input mode" key on the VFD to prevent unexpected audio-source changes.
– Acquires adjustable Power On and Max Volume settings from the TV's Hotel option menu. The Sound-Bar's Power On Volume and
Max Volume values, however, are ½ of the Power On Volume and Max Volume settings in the TV's Hotel options menu.
Example: If the TV's Power On Volume=20 and Max Volume=90, then the Sound Bar's Power On Volume=10 and Max Volume=45.
License
Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are
trademarks of Dolby Laboratories.
TV
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS, Inc. DTS, the
Wall mount
Adapter Symbol, DTS in combination with the Symbol, DTS Premium Sound|5.1, DTS Digital Surround, DTS
Express, and DTS Neo2:5 are registered trademarks or trademarks of DTS, Inc. in the United States
and/or other countries.
ⓒ DTS, Inc. All Rights Reserved.
For DTS patents, see http://patents.dts.com. Manufactured under license from DTS Licensing
Limited. DTS, the Symbol, DTS in combination with the Symbol, and DTS Studio Sound are registered
trademarks or trademarks of DTS, Inc. in the United States and/or other countries. ⓒ DTS, Inc. All
Rights Reserved.
The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks
or registered trademarks of HDMI Licensing LLC in the United States and other countries.
This DivX Certified® device has passed rigorous testing to ensure it plays DivX® video.
To play purchased DivX movies, first register your device at vod.divx.com. Find your registration
code in the DivX VOD section of your device setup menu.
DivX Certified® to play DivX® video up to HD 1080p, including premium content.
DivX®, DivX Certified® and associated logos are trademarks of DivX, LLC and are used under
license.
Covered by one or more of the following U.S. patents:
7,295,673; 7,460,668; 7,515,710; 8,656,183; 8,731,369; RE45,052.
Open Source License Notice
Open Source used in this product can be found on the following webpage. (http://opensource.samsung.com)
Open Source License Notice is written only English.
Quantity
4
Hotel Plug & Play
The Hospital Plug & Play function, which automatically performs the Hospital Mode selection, Country Setup, Clock Setup, and
Picture Mode Setup, runs once when power is first turned ON. Setup also runs automatically after you have executed a Service
Reset.
1 AV IN
2 USB (5V 0.5A) / CLONING
◆ Region Settings
3 HDMI IN 1 (DVI), 2 (ARC) – Initially highlighted: US
you can select the region you want and next
4 ANT IN
HG32NE460
◆ TV Basic Setup
5 EX-LINK
– Initially highlighted: TV Basic Setup
6 AUDIO OUT
Start basic setup to use your TV
– If you select the Cloning Mode
Clone system settings from a USB flash drive or server
to your TV. Make sure that a USB flash drive is connected
before you attempt to clone system settings from it.
– If you select Factory Menu
1 USB (5V 0.5A) / CLONING
End setup and go directly to the factory you should
2 HDMI IN 1 (DVI), 2 (ARC)
power off and on to start the TV.
3 AV IN – If you select commercial TV Mode
Start basic setup to use your TV in a commercial
4 AUDIO OUT
HG40NE460
business.
EX-LINK
5
◆ Select your Language OSD
6 ANT IN
– Initially highlighted: Español
ANT IN AIR/CABLE
AIR/CABLE
– Display time: OSD time out and operation are the same
ANT IN
AIR/CABLE as Samsung's consumer TV models.
6
– If you press the Enter key, the "Configure your TV" OSD
6
appears.
◆ Configure your TV OSD
– Initially highlighted: Standard.
– The TV displays the Picture Mode OSD where you can
choose Dynamic or Standard Picture mode.
◆ Auto Program Mode OSD
– If you press the Enter key, the TV automatically searches
for channels.
Dimensions
HG32NE460
1 2
745.4 699.7
HG40NE460
1 2
922.7 880.1
Specifications
Environmental onsiderations
Operating Temperature
Operating Humidity
Storage Temperature
Storage Humidity
Model Name
Display Resolution
Screen Size
(Diagonal)
Sound (Output)
Dimensions (WxDxH)
Body
With stand
Weight
Without Stand
With Stand
Design and specifications are subject to change without prior notice.
➣
➣ This device is a Class B digital apparatus.
WARNING: This product contains chemicals known to the State of California to cause cancer and reproductive toxicity.
◆ Set Clock Mode and Time Zone OSD
– Initially highlighted: Clock Mode : Auto, Time Zone :
South and Southeast
– If the TV will be tuned to digital broadcast channels, and
these channels transmit date and time information, set
the Clock Mode to Auto. The TV will set the date and
time automatically.
– If the TV will not be tuned to digital broadcast channels,
set the Clock Mode to Manual, and then set the date and
time on the TV manually.
– Select your time zone on the map appears.
9
7
1
2
3 4 5 6
8
(unit: mm)
3 4 5 6 7 8 9
394.3 433.9 442.2 484.2 57.9 163.4 69.0
8
1 7
2
4 5 6
3
9
(unit: mm)
3 4 5 6 7 8 9
802.2 487.4 530.7 555.1 40.5 72.0 170.3
50°F to 104°F (10°C to 40°C)
10% to 80%, non-condensing
-4°F to 113°F (-20°C to 45°C)
5% to 95%, non-condensing
HG32NE460S HG40NE460S
1366 x 768 1920 x 1080
32" Class 40" Class
(31.5" measured diagonally) (39.5" measured diagonally)
5W x 2 10W x 2
745.4 x 69.0 x 442.2 mm 922.7 x 72.0 x 530.7 mm
745.4 x 163.4 x 484.2 mm 922.7 x 170.3 x 555.1 mm
4.0 kg 6.7 kg
4.4 kg 6.9 kg
2016-06-07 오후 3:27:19