Cleaning And Maintenance; Troubleshooting; Battery Removal Pg-250; Performance Guarantee - Remington Titanium PG-250 Use And Care Manual

CS27505_pg250_IB 8/31/05 5:08 PM Page 10

Cleaning and Maintenance

Clean Your Groomer Regularly

Clean your groomer regularly to ensure your
unit's operating life is not prematurely short-
ened.

Cleaning attachments with water

Remove attachments.
Rinse attachments
under warm running
water. Do NOT use hot
water, which may
cause damage to
components.
You can use a hair
dryer on a cool or
medium heat setting to
help dry off the attach-
ments, if desired.
!
Do not use harsh or corrosive cleaners on
the unit or its cutters.
!
Do not apply pressure or hard objects to
cutters.
Oiling the blades
If you rinse the attachments, you will need to
lubricate the cutter blades once a month with
blade oil. Simply spread 1-2 drops of oil lightly
over the cutters with your finger-tip. Wipe
away any excess oil from the cutters or the
groomer.
Oiling cautions
Use only the light-grade oil like sewing
machine oil–these oils will not evaporate
and will not slow down the blades.
Do not use hair oil, grease, or any oil mixed
with kerosene or solvent will evaporate
and leave the thick oil, slowing the blades.
Cleaning with brush
Thoroughly brush and blow out hair clippings
from cutter, bottom of attachments, and top of
power handle.
Cleaning the MiniScreen shaver
!
Do NOT rinse or oil MiniScreen shaver
attachment. The unit is permanently
lubricated.
10
Press buttons at the ends of the screen
head.
Remove head and shake out the clippings
Blow off cutter assembly.
Replace head, making sure it snaps in
place.

Troubleshooting

? If the cutters do not move
The cutting unit may be dirty and clogged.
Clean and lubricate the unit as described
above.
? If the groomer doesn't work when
turned on
It may simply need charging. Follow the
instructions for charging on page 6. If
charging doesn't solve the problem,
contact an authorized service center.
? If the groomer does not hold a charge
Fully discharge the PG-250 by running it
until it stops. Then follow the recharging
instructions on page 6. If the time between
recharging cycles does not increase, the
battery may need replacing. Contact an
authorized service center.

Battery Removal PG-250

When your rechargable groomer reaches the
end of its useful life, the batteries must be
removed from the groomer and recycled or
disposed of properly in accordance with your
local and state requirements.
The following procedure
should be followed for
battery removal:
Make sure your groomer
is unplugged form any
outlets so you don't risk
an electric shock.
Pull or gently pry the
clipper halves apart,
exposing the batteries.

Performance Guarantee

Remove batteries from the unit
Twist batteries to break wires or the
wires may also be cut
CAUTION: THESE NICKEL-CADMIUM
BATTERIES MUST BE RECYCLED OR
DISPOSED OF IN ACCORDANCE WITH
STATE AND LOCAL REGULATIONS.
Do not burn or mutilate, as they may burst
or release toxic materials. Do not short-
circut, as this may cause burns.
The EPA-certified RBRC ® Battery Recyling Seal on
the ncikel-cadmium (Ni-Cd) battery indicates
Remington Products Company, L.L.C. is voluntarily
participating in an industry program to collect and
recyle these battereis at the end of their useful life
when taken out of services in the United States or
Canada. The RBRC program provides a
®
convenient alternative to placing used
Ni-Cd batteries into the trash or the
municipal waste stream, which may be
illegal in your area. Please call
1-800-8-BATTERY SM for information on Ni-Cd
battery recycling and disposal bans/restriction in
your area. Remington Products Company, L.L.C.'s
involvement in this program is part of our commit-
ment to preserving our environment and conserving
our natural resources.
Full Two-Year Warranty
Rayovac Corporation warrants this product
against any defects that are due to faulty
material or workmanship for a two-year
period from the original date of consumer
purchase. This warranty does not include
damage to the product resulting from
accident or misuse.
If the product should become defective
within the warranty period, we will repair it
or elect to replace it free of charge. Return
your product and sales receipt with your
name, address and day time phone number
to: Rayovac Corporation, Attention:
Consumer Services, 601 Rayovac Drive,
Madison, WI 53711. For more information
call 800-736-4648.
KEEP ORIGINAL SALES RECEIPT AS
PROOF OF PURCHASE FOR WARRANTY
PURPOSES.
This warranty does not cover products
damaged by the following:
Accident, misuse, abuse or alteration
of the product
Servicing by unauthorized persons
Use with unauthorized accessories
Connecting it to incorrect current and
voltage
Wrapping cord around appliance
causing premature wear & breakage
Any other conditions beyond our
control
No responsibility, obligations, or liability is
assumed for the installation or maintenance
of this product.
RAYOVAC CORPORATION SHALL NOT BE
RESPONSIBLE FOR ANY INCIDENTAL,
SPECIAL OR CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF THIS
PRODUCT. ALL IMPLIED WARRANTIES
INCLUDING BUT NOT LIMITED TO IMPLIED
WARRANTIES OF FITNESS AND MER-
CHANTABILITY, ARE LIMITED IN DURATION
TO TWO YEARS FROM DATE OF ORIGINAL
PURCHASE.
This warranty gives you specific legal rights
and you may also have other rights which
vary from state to state or province to
province. Some states do not allow the
exclusion or limitation of incidental, special
or consequential damages.
11