Sony Xperia Z5 Settings Manual

Setting Guide
Introduction
Thank you for buying the "Xperia TM Z5" (simply called the "product" from here
on).
In this guide, settings and precautions for using the product are described.
● Basic operation ● Transferring data from au
Describes the basic operations.
Setting Menu
Import/export data to/from the
● Initial settings
product using microSD memory card
Make initial settings when you turn
or au Smart Pass server.
the power on for the first time.
● Sending contacts
● E-mail setting
Send contacts to another phone.
Make initial settings for @ezweb.
ne.jp etc.
● Saving battery power
Save battery power using the quick
● Making a call
setting panel or the quick setting
Describes how to make a call.
tools.
● Receiving a call
Describes how to receive a call.
Company names and product names referred to in this manual are trademarks or
registered trademarks of respective companies.
The TM, ® marks may be omitted in this manual.
Screen illustrations shown in this manual may look different from the actual screens.
In some cases, upper or lower part of a screen may be omitted.
October 2015, 1st Edition
Sold by: KDDI CORPORATION, OKINAWA CELLULAR
TELEPHONE COMPANY
1299-0026.1 Manufactured by: Sony Mobile Communications Inc.
Using Wi-Fi ® network selection settings
Select from detected Wi-Fi ® network to set.
To select a protected Wi-Fi ® network, you need to enter a security key.
1 2 3
Select Wi-Fi ® Enter a password Connect Wi-Fi ® network
network (security key) → → [NEXT] → [NEXT]
[CONNECT]
Setting Wi-Fi ® network manually
Add Wi-Fi ® network manually.
Check network SSID, authentication type, etc. in advance.
If security is set, you need to enter a security key.
1 2 3
[ADD ANOTHER Select network SSID Connect Wi-Fi ® network
NETWORK] and security type → → [NEXT] → [NEXT]
Enter a password
(security key) as
required → [SAVE]
Basic operation
For detailed descriptions of operations, refer to the "Basic Manual"
(Japanese) app installed on the product or "取扱説明書 （詳細版） (Full
Instruction Manual)" (Japanese) available on the au homepage.
OPower key/Power Lock key/
Status bar
Fingerprint sensor
Current status and
notification icons
Power ON
are displayed.
Press and holdOfor over 1 second.
Screen Lock
PressOwhile the screen displayed. The
backlight turns off and screen lock is activated
(avoiding the keys or touch screen from false
operations).
Unlocking Screen Lock
The lock screen appears when turning the power
on or the backlight on by pressingO. Swipe
(flick) the screen up to cancel the screen lock.
Register fingerprints to cancel the screen lock
by touching O.
App key
Tap to display the apps screen.
n Recently used apps
Tap to display recently-used apps in the
thumbnail list and activate or end them from
the list. You can use small apps, too.
h Home key
Tap to display the Home screen.
b Back key
Tap to return to the previous screen.
Display (Touch panel)
Operate directly touching with your finger.
■ STEP 3: Setting up an Google account
Set up a Google account so that you can synchronize with Gmail or contacts or calendar, etc. of online service.
●To set online service, make sure that data communication is enabled. Check that
● If you set up a Google account, you can use Google apps such as "Gmail", "Google Play" or "Hangouts". Gmail's mail address "(user name) @gmail.com" is automatically created from
the user name set with a Google account. To create an account, you are required to register "First name" and "Last name".
1 2 3 4
[GET STARTED] → [Or create a new Enter "First name", Enter a user
[SKIP] account] "Last name" name → [NEXT]
* To copy a Google * If you have Google → [NEXT]
account from the other account, enter the
mail address and then
device using Tap & Go,
follow the onscreen follow the onscreen
instructions. instructions.
8 9 10
* After step 4,
checking registration
of username starts.
If the entered user
name is unavailable,
an entry screen for
prompting another
user name appears.
* When you enter
another phone
number in step 6,
enter the notified
Set purchase Confirm the Google [NEXT] Verification code and
settings for Google services settings → then tap "NEXT".
Play as required [NEXT]
→ [NEXT]
■ Opening Notification panel
If any notification icons are displayed on the left
Notification
side of the status bar, slide down the status bar
panel
to open the Notification panel. You can check
details of notification icons, start corresponding
apps, etc.
Slide the status bar down with two fingers or slide
the Notification panel down to display the quick
setting panel. You can set on/off of the functions.
■ Touch panel operations
Tap/Double-tap Long-touch
Tap: Gently touch Keep touching an item
a screen and then with your finger.
immediately release
your finger.
Double tap: Touch the
same position twice.
Slide Flick (swipe)
While your finger is
Operate the screen
gently touching the
by quickly moving
screen, trace it to the
(flicking) your finger
desired direction to
up/down or right/left.
move over.
Pinch Drag
Touch the screen with Keep touching an item
two fingers and widen or icon, trace it to the
(pinch-out) or narrow desired direction to
(pinch-in) the fingers' move.
distance.
■
Displaying menu
There are two types for displaying the screen menu; tapping " " and long-
touching an input field or item.
appears on the status bar or the product is connected to a Wi-Fi ® network.
5 6 7
Enter a password Recovery phone → [I AGREE] →
[NEXT] → [VERIFY]
→ [NEXT] [NEXT]
* The phone number of
your au Nano IC Card 04
is entered automatically.
■ STEP 4: Completion of setup
When the setup completion screen appears, tap "FINISH".
When Data disclaimer screen appears, confirm the content and tap
"OK".
■ Character entry
Use software keyboard to enter characters.
The software keyboard appears when you tap the entry field for registering
a contact, composing a mail, etc.
Software keyboard
With "International keyboard", you can use QWERTY keyboard to enter
characters, Numeric keypad to enter numbers and symbols, and Symbol
keypad for more symbols.
●Tap " " to display Numeric keypad. For Symbol keypad, tap " " on the
Numeric keypad.
●Tap " " to display the keyboard setting menu.
《QWERTY keyboard》
《Numeric keyboard》
《Symbol keyboard》
■ au Easy Setting
Set au convenient functions or services.
●By setting au ID, you can use various services provided by au such as auスマートパス (au Smart Pass) or "au Kantan Kessai", which allows you to purchase
apps from Google Play.
* au ID which is already used by another user cannot be set.
● Alternatively, after the initial setting is complete, from the Home screen, tap [ ] → [Settings] → [au Settings Menu] → [au Easy Setting], you can set au service.
1 2 3 4
[Next] Select "Register [au IDの設定・ Enter a password
"au ID"" → [Next] 保存 (Set/save number → [OK]
au ID)] * Default value is four-
digit number set at
subscription.
8 9 10 11
Select "Turn Auto Mark apps to Select "Activate" or Select "Activate" or
install → "Skip activation" "Skip activation"
Backup on" or
[次へ (Next)] → [Next] → [Next]
"Turn Auto Backup
off" → [Next]
Initial settings
When you turn on the product for the first time, follow the onscreen
instructions to set the language, functions, services, etc.
■
STEP START: Setting language
Select "English (United States)" and tap "START".
●Alternatively, after the initial setting is complete, from the Home
screen, tap [ ] → [設定 (Settings)] → [言語と入力 (Language &
input)] → [地域／言語 (Language)] to set the language.
■ STEP 1: Starting basic settings
When "Welcome" appears, tap "NEXT".
■ STEP 2: Setting Wi-Fi ® connection
Use home wireless LAN (Wi-Fi ® ) or public wireless LAN to connect
Internet service. Operate in a place where signal of Wi-Fi network can
®
be received.
Tap "SEARCH FOR NETWORKS".
●Wi-Fi ®
network with is open network.
●Wi-Fi ®
network with is protected by security. To connect, enter
password (security key).
●To detect Wi-Fi ® ®
network manually or make Wi-Fi advanced settings,
after the initial setting is complete, tap [ ] → [Settings] → [Wi-Fi] →
[ ] → [Refresh]/[Advanced].
5 6 7
Set password Select "Update" Confirm contents
→ [設定 (Set)] → [Next] Select "Agree" →
→ [終了 (Exit)]
[Next] → [Agree]
12 13
* The screens of the step 8
and from 10 to 12 appear
only if "Agree" is selected in
the step 7.
* If there are apps to be
recovered, a recovery
screen for applications
appears before the step
10. Follow the onscreen
instructions.
* Select "Agree" in step 7 to
complete pre-configuration
Mark data to be [Finish]
of Lookout for au.
restored →
* When the use
[次へ (Next)]
confirmation screen
appears, follow the
onscreen instructions.