RCA RCR6373 Owner's Manual

Transport keys,
including SKIP
and SLOW,
give you
better DVD/
DVR control
INFO key
displays
information
for the
component
you're
controlling
Dedicated
MENU
key lets
you access
advanced
component
functions
Actual
model may
vary from
picture
shown
The INPUT and — (dash) key has three
functions, it () toggles through all the video or
audio sources connected to your TV or audio
component; (2) toggles between VCR and the
TV input; (3) lets you separate the main channel
number from the sub-channel number in digital
channel numbers
RCR6373/RCR6473
Universal Remote Control
Owner's Manual
Manual del Propietario (parte posterior)
Component
keys (TV,
SAT•CBL, DVD,
DVR•AUX1,
AUDIO,
VCR•AUX2)
SLOW•ASPECT
key changes
between
full- and
widescreen
formats on
HDTVs
Dedicated
GUIDE key
gives you
easy access
to program
guides
Arrow
keys for
navigating
your
components'
menu systems

Six-Component
Universal Remote
Congratulations on your purchase of this six-component
universal remote. This universal remote controls up to six
electronic components and makes juggling remote controls
a thing of the past. Your remote is guaranteed to work with
all brands of components. This remote is unusually versatile
because it has two AUX keys that you can program to control
any video component. The six-component universal remote is
easy to use, easy to program, and gives you control at the touch
of your fingertips.
SAVE THIS MANUAL AND THE CODE LISTS!
Remote controls can sometimes lose their programming when you
change the batteries. Make sure you keep the manual and code lists in
a safe place so that you can reprogram the remote if you need to.
Tip: The six-component universal remote is already programmed
to operate most RCA, GE, and PROSCAN branded TVs, VCRs,
DVD players, and satellite receivers. Just press the corresponding
key—DVD for a DVD player, TV for a television, SAT•CBL for a
satellite receiver, etc.
Battery Installation and Information
Your universal remote requires two AAA alkaline batteries
(batteries may or may not be included, depending on model).
To install the batteries:
1. Remove the battery compartment
cover.
2. Insert the batteries, matching the
(+) and (–) marks inside the battery
compartment.
3. Push the battery cover back into place.
Note: If you are replacing batteries, try not to press any keys after
you've taken the old batteries out. Pressing keys while replacing
batteries causes the remote to lose the components you've programmed.
You will need to program the remote again.
Battery Precautions:
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-
cadmium) batteries.
• Always remove old, weak or worn-out batteries promptly and recycle or
dispose of them in accordance with Local and National Regulations.

Battery Saver

Your universal remote control saves battery power by
automatically turning off if any key is pressed for more than
60 seconds. This saves your battery life should your remote
get stuck in a place where the keys remain depressed, such as
between sofa cushions.

Care and Maintenance

• Keep the remote dry. If it gets wet, wipe it dry immediately.
• Use and store the remote only in normal temperature
environments.
• Handle the remote gently and carefully. Don't drop it.
• Keep the remote away from dust and dirt.
• Wipe the remote with a damp cloth occasionally to keep it
looking new.
• Modifying or tampering with the remote's internal components
can cause malfunction and invalidate its warranty.