RCA RS22162 User Manual

USER MANUAL
RS22162 S
It's important to read this instruction prior to using your new product for the first time.
SYSTEM CONNECTIONS
1. CONNECTING THE SPEAKERS
Connect the wires to the speaker terminals.
Note: Connecting speakers other than the speakers supplied with the unit, may
damage the unit.
2. USING THE AC ADAPTER
Before use, make sure that the rated voltage of your AC adapter matches your local
voltage. Make sure both speakers are connected correctly before plugging the AC
adapter cord into the AC power outlet.
To AC Power Outlet
AC adapter
- 5 -
SAFETY PRECAUTIONS
The following marks and symbols are located on the back of the unit.
T h e l i g h t n i n g f l a s h w i t h
arrowhead symbol, within an
equilateral triangle, is intended to
alert the user to the presence of
uninsulated "dangerous voltage"
within the product's enclosure that
may be of sufficient magnitude to
constitute a risk of electric shock
to persons.
The exclamation point within
CAUTION: TO REDUCE THE RISK OF
a n e q u i l a t e r a l t r i a n g l e i s
ELECTRIC SHOCK, DO NOT REMOVE COVER
intended to alert the user to the
(OR BACK). NO USER-SERVICEABLE
presence of important operating
PARTS INSIDE. REFER SERVICING TO
and maintenance (servicing)
QUALIFIED SERVICE PERSONNEL.
instructions in this owner 's
manual.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO
RAIN OR MOISTURE.
The symbol for Class
(Double lnsulation)
This product contains a low power laser
device.
Warnings
• The apparatus shall not be exposed to dripping or splashing and that no objects filled with
liquids, such as vases, shall be placed on apparatus.
• The AC adapter is used as disconnect device and it should remain readily operable during
intended used. In order to disconnect the apparatus from the mains completely, the AC adapter
should be disconnected from the mains socket outlet completely.
• Minimum 10 cm (4 inches) distances around the apparatus for sufficient ventilation.
• Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
• Do not restrict the airflow of the unit by placing it in a place with poor airflow, by covering it
with a cloth, or by placing it on carpeting.
• No naked flame sources such as lighted candles should be placed on the apparatus.
- 2 -
SYSTEM CONNECTIONS
3. CONNECTING WITH OTHER OPTIONAL EQUIPMENT
Listening to the Audio Signals from the
External Equipment
1) Connect the AC adapter to the
AC power outlet.
2) Slide the FUNCTION selector
to the AUX position. The
AUX IN indicator lights up.
3) Turn on your audio equipment
and play the external source.
Audio
Equipment
Built-in
AUX cable
Storing the Built-in AUX Cable
1) Place the built-in AUX cable
inside the tray.
2) Gently push the tray door up
until it is closed.
- 6 -
PRECAUTIONS
Follow the advice below for safe and appropriate operations.
ON PLACEMENT
• Do not use the unit in places which are extremely hot ,cold ,dusty, or humid.
• Place the unit on a flat and even surface.
• Do not restrict the air flow of the unit by placing it in a place with poor air flow, by cover-
ing it with a cloth, or by placing it on a carpet.
ON SAFETY
• Before operating, make sure that the rated voltage of the AC adapter matches your
local voltage.
• When you are not going to use the unit for a long period of time, disconnect the AC
adapter.
ON CONDENSATION
• When left in a heated room where it is warm and damp, water droplets or condensation
may form inside the CD player.
• When there is condensation inside the unit, the unit may not function normally.
• Let it stand for 1 to 2 hours before turning the power on, or gradually heat the room
and allow the unit to dry before use.
FCC INFORMATION
This device complies with Part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) This device
must accept any interference received, including interference that may cause undesired
operation.
Note: This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following
measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an AC power outlet that is on a circuit different from the
one the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warnings: Changes or modifications to this unit not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du
Canada.
- 3 -
LOCATION OF CONTROLS
1. CD Door 9. TUNING Control
2. SKIP/SEARCH Buttons
10. VOLUME Control
3. REPEAT Button
11. DISC SKIP Button
4. POWER Indicator
12. STOP Button
5. REPEAT Indicators
13. PLAY/PAUSE Button
(ONE SONG / ONE DISC / ALL
14. Remote Sensor
DISC)
15. Dial Scale
6. CD Display
16. BAND Selector (AM/FM)
7. FUNCTION Selector
17. AUX IN Indicator
(OFF/TUNER/AUX/CD)
18. AUX IN Cable
8. PHONES jack
- 7 -

IMPORTANT SAFETY INSTRUCTIONS

Read these instructions.
1
Keep these instructions.
2
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with a dry cloth.
Do not block any of the ventilation openings. Install in accordance with the
7
manufacturer's instructions.
8 Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized
9
plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade or the third prong are provided
for your safety. If the provided plug does not fit into your AC power outlet, consult an
electrician for replacement of the obsolete outlet.
10 Protect the AC power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11 Only use attachments/accessories specified by the manufacturer.
Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer,
12
or sold with the apparatus. When a cart is used, use caution when moving the cart/
apparatus combination to avoid injury from tip-over.
Portable Cart Warning
Unplug this apparatus during lightning storms or when unused for long periods of
13
time.
14 Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as the AC power cord or plug is
damaged, liquid has spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been
dropped.
- 4 -
RADIO OPERATION
1. Slide the FUNCTION selector to
2. Slide the BAND selector to desired
TUNER.
band (AM/FM).
The POWER indicator lights up.
4. Adjust the volume level.
3. Tune into a station.
- VOLUME +
- TUNING +
FOR BETTER RECEPTION
Fully unwind the wire antenna. Then Rotate the unit to get the best receiving
extend the wire antenna and place it in
position.
the position that sounds best.
(When the FM broadcast signal is strong,
it can receive FM Stereo Broadcast.)
NOTE: DO NOT CONNECT TO AN OUTSIDE ANTENNA.
AFTER LISTENING
Slide the FUNCTION selector to OFF.
- 8 -