Auto Tuning; Dtvlink Setup; Special Features - RCA scenium User Manual

Using the TV's Menu System
Main Menu Connections
0 Select which input or channel should be automatically tuned
Go Back
when a button listed below is pressed on the remote control.
1
Signal Strength
VCR
2
Channel Search
Front Input
3
Software Upgrade
VCR2 (Aux default)
Front Input
4
Signal Source
DVD
5
Video Input Setup
Front Input
6

Auto Tuning

SAT-CABLE (Satellite or Cable Box)
7

DTVLink Setup

Front Input
8

Special Features

Press OK to select the channel or input that is tuned when
9
Ethernet Setup
the VCR key is pressed on the remote.
Main Menu Connections
0 The DTVLink Setup menu has screens for setting up DTVLink
Go Back
devices to work with the TV.
1
Signal Strength
•DTVLink Connect: Set an analog input for a DTVLink device.
2
Channel Search
•Recording Device: Select a default digital recording device.
3
Software Upgrade
4
Signal Source
5
Video Input Setup
6
Auto Tuning
7
DTVLink Setup
8
Special Features
Two lines of help text will appear in this area to explain the
9
Ethernet Setup
feature and instruct the user on how to use it.
Main Menu Connections
0
Go Back
Select what should occur when power is restored to the TV:
1
Text here Initial Channel
Off: Initial Channel is disabled
2
Initial Volume
On: Go to last input or channel selected
On: Go to Cable Input
3
Maximum Volume
Channel
4
CableCARD Tools
5
Remote Setup Note: An Initial Channel setting of "On" will be enabled only
when the TV is plugged back in or electricity is otherwise
restored to the TV. Initial Channel is not enabled from the
turning on of the TV with the remote or front buttons.
Press or to point to an option, then press OK to
select it. Press to return to the menu.
62
Auto Tuning
This menu lets you specify the various components you have connected to your
AUDIO
TV. It lets you program a component button on the remote control (VCR, AUX,
Front Input
RCA SAT2
Front Input DVD, SAT/CAB, or AUDIO) so that pressing the button automatically turns on
the TV and turns the TV to the correct Video Input Channel (go to Chapter 3 for
detailed information).
DTVLink Setup
The DTVLink Setup option lets you set items specific to the component(s)
connected to your DTVLink (1394) jack(s).
•
•
Special Features
Special Features
The special features are mostly intended for commercial/retail use.
999 Sub-channel 999
Notes: The AUX button by default is set up for a second RCA VCR. If you
need to reprogram the AUX button, or instead want to program the VCR
button, use the 2001 code. Then use the VCR2 option in the auto tuning
menu to set auto tuning.
If you have two RCA satellite receivers, you can control each separately.
Program the second receiver with the AUX button using the 5001 code.
Then use the RCA SAT2 option in the auto tuning menu to set auto
tuning.
DTVLink Connect applies to those DTVLink components that require a
DTVLink and analog connection. Only that type of DTVLink components
will appear. Highlight the choice field under your model, and press OK to
choose the analog input you're using.
If you have more than one DTVLink component connected to your TV, the
Recording Device menu allows you to choose which component you want
to use as your default to record when you press the RECORD button on
your remote and set. Go to page 49 for more information on setting a
DTVLink recording and for an explanation of the options in the screen.
Notes: The TV only outputs video and audio to a component which
enforces copy-protection measures.
Some components that don't support Digital Copy Protection may cause
errors on the DTVLink connection if another source that supports Digital
Copy Protected material is connected to the DTVLink.
Initial Channel You can select the channel that your TV tunes to each
time the TV is turned on by plugging it back in. Choose a video input or
select Antenna or Cable Input and select a channel.
Initial Volume This feature works only if the Initial Channel feature is set
to On. Select the volume level that you want when the TV is turned on.
Maximum Volume This feature is intended to stop the volume from being
turned up too loudly. Set the volume at the loudest level you would want to
hear.
Chapter 4