How To Connect: Tv + Vcr + Dvd Player - RCA scenium User Manual

TV

How to Connect: TV + VCR + DVD Player

1. Connect your cable and/or off-air antenna.
If you have cable and an off-air antenna, connect the cable signal to CABLE INPUT. Connect the off-air antenna to
ANTENNA INPUT.
2. Connect your DVD Player to your TV.
A. Connect the audio (white and red) cables to the INPUT 4 R and L Audio jacks on the back of the TV and to the
Audio Output jacks on the DVD player.
B. Connect three video grade cables to the INPUT 4 Y/VIDEO P
outputs on the DVD player. If your DVD player doesn't have Y P
use the INPUT 3 S-VIDEO jack instead of the V (Video) jack for better picture quality.
Notes: If you are using an S-Video cable or component video cables, you must also connect audio cables. The S-Video
cable and component video cables only transfer video information.
If your DVD player has a component video output, we recommend you use the component video input on the TV instead of
the composite video or S-Video connection.
3. Connect your VCR to your TV.
A. Connect the VCR's audio/video outputs to INPUT 1 (R and L-Audio, and V-Video) on the TV using composite audio/video
cables.
B. Connect the VCR's audio/video inputs to AUDIO/VIDEO OUTPUT jacks on the TV. This enables recording of digital
and analog programs (except copy protected or component video formats).
Viewing the Components
1. Turn on the TV and the component(s) you want to view.
2. Press the TV button on the remote control.
3. Press the INPUT button on the remote control to scroll through the Video Input Channels.
• View the VCR on the INPUT 1 channel.
• View the DVD player on the INPUT 4 channel.
Note: You can set up the TV to automatically tune to the correct Video Input Channel. This is called Auto Tuning.
(See Chapter 3 for more information.)
Chapter 1
FIXED/VARIABLE AUDIO OUTPUTS
CENTER SPEAKER INPUT CENTER R REAR L REAR
MATRIX
EXTERNAL AMP
SURROUND
MAX POWER RATING!
(60 WATTS into 8 OHMS) OUTPUTS
WIRED
SUBWOOFER R L
R
IR
POWER
(AC 120V~60Hz)
DIGITAL
AUDIO
CableCARD™
ETHERNET
OUTPUT
3B
VCR
ANTENNA IN
AUDIO VIDEO
R L
OUT
IN
ANTENNA OUT
Connections & Setup
R AUDIO L VIDEO
IN
R L VIDEO PR
OUT
2A
COMPONENT/COMPOSITE INPUTS
COMPOSITE INPUTS
INPUT 3
R L V S-VIDEO
R
AUDIO/VIDEO
OUTPUT
L R
V S-VIDEO
R L V
INPUT 1
CABLE
INPUT For Factory Use Only
HDMI/DVI INPUT
Use menu for DVI audio.
3A
R AUDIO L VIDEO
P jacks on the back of the TV and to the Y P
B R
P but has composite video and an S-Video output,
B R,
DVD
PB Y S-VIDEO
2B
Use menu for composite video.
INPUT 4
L/
L P P Y/VIDEO
R
B
L
P P Y/VIDEO
R B
INPUT 2
ANTENNA INPUT
OFF-AIR ANTENNA
1 CABLE
P
B R
Go to page 23
15