Setup Menu - RCA 32v434t User Manual

SETUP
Go Back
Auto Ch. Search < > ...
List & Labels
Closed Caption
Favorite CH
Language
Format
AUTO CHANNEL SEARCH
Go Back
Signal Source < > Digital...
Digital Signal Type
Start
Search percent
Digital Channel
AUTO CHANNEL SEARCH menu for
digital signals.
Chapter 3
Using the TV's Menu System

Setup Menu

Auto Ch. Search (Auto Channel Search) Allows you to choose your
signal type and begin an Auto Channel Search.
...
...
Press the left or right arrow button to choose among the signal sources
...
below:
English...
4:3
• Both
• Digital
Cable... • Analog
...
0
0
Now use the down arrow button to choose a signal type.
• Digital Signal Type
• Analog Signal Type Choose between Cable or Antenna if you are
After you have made the selections above, use the down arrow button
to highlight Start.
• Start Press the right arrow button to start the search. Searches for
• Search percent Number displayed indicates how much of the
• Analog Channel Shows the channel numbers as they are being
• Digital Channel Shows the number of channels found as they are
If you have connected both coaxial inputs on the back panel
of your TV, you can choose to do your Auto Channel Search on both
connections at one time by making this choice. Refer to page 5 for a
complete explanation of these connections.
Choose if you are connected to the ANTENNA/CABLE
DIGITAL INPUT jack.
Choose if you are connected to the ANTENNA/CABLE
ANALOG INPUT jack.
Choose between Cable or Antenna if you are
connected to the ANTENNA/CABLE DIGITAL INPUT jack. If you chose
Both above, then you'll need to choose a signal type for your digital
and analog connections.
connected to the ANTENNA/CABLE ANALOG INPUT jack. If you chose
Both above, then you'll need to choose a signal type for your digital
and analog connections.
channels the TV is receiving and stores them in the channel list. Go to
page 11 (Auto Channel Search) for more information.
search has been completed on a digital signal.
searched.
being searched.
29