Setting Operation (Ray230E) - Raymarine Ray230 Owner's Handbook Manual

Operations
3.5.30.5
This operation sets the function features of the RAY230E: the name of the
Intercom station, the ATIS ID number and on/off state, the MMSI number,
the Tri-Watch function, and the call tone type of the siren.
1. Press the FUNC key followed by the MENU key to initiate the Menu
mode. Mn is shown on the 7-segment display and NAVSTAT appears
on the dot matrix display.
2. Press the SQ UP/DOWN key to select SETTING.
3. Press the ENT key. The message SET appears on the 7-segment display
and INTERCM appears on the dot matrix display. Pressing the SQ UP/
DOWN key alternates between the following:
INTRCM
MY ATIS
MY MMSI registers the MMSI number
TRI
ATIS
SIREN
Note: The ATIS selection only appears if this option has been enabled
by the dealer.
4. Select the desired operation and press the ENT key to submit your
selection.

Setting Operation (RAY230E)

selects the Intercom setting
registers the ATIS ID number
selects the Tri-Watch operation
turns the ATIS function ON or OFF
selects the siren setting
ENT
3-71