Planning The Installation - Raymarine E55061 Owner's Handbook Manual

Raymarine owner's handbook seatalk2 keyboard e55061
Table of Contents

Advertisement

Planning the installation

Where can the SeaTalk
2
The Seatalk
keyboard can be flush or trunnion mounted either indoors or outdoors. It is
waterproof to CFR-46 standard.
Important:
The drain tube is not required if the keyboard is mounted indoors or in an area protected
from rain and/or sea spray. If mounting the keyboard outdoors or in an unprotected area
the drain tube will need to run to a suitable exit point below the level of the keyboard.
What configuration should I use?
How you connect the keyboard depends on the distances between your E-Series Display, the
keyboard and power source and whether or not you are connecting the keyboard to an
2
existing SeaTalk
system. Select the appropriate configuration from the following:
Configuration 1
Cable length between E-Series Display and keyboard less than 4.5m and
Not linking into an existing SeaTalk
Supplied in the box
2
SeaTalk
Keyboard
Keyboard cable
(attached/3 m)
Terminator
Junction box
2
Keyboard be mounted?
2
system.
Not supplied/accessory/
existing system
SeaTalk
2
SeaTalk
Power/RF ground cable (1.5 m)
Terminator
4
E Series display
E-Series Display
2
cable (1.5 m)
5A circuit breaker
Or:
Switch with 5A fuse
red
12v supply
black
grey

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Seatalk2

Table of Contents