Rangemaster Ceramic Hob Installation And User Manual
Rangemaster Ceramic Hob Installation And User Manual

Rangemaster Ceramic Hob Installation And User Manual

Professional ceramic hob

Advertisement

Quick Links

Users
Guide
&
Installation
Rangemaster Ceramic Hob
Professional Ceramic Hob
COD. 01080GB - 30.05.2002

Advertisement

Table of Contents
loading

Summary of Contents for Rangemaster Ceramic Hob

  • Page 1: Users Guide

    Users Guide & Installation Rangemaster Ceramic Hob Professional Ceramic Hob COD. 01080GB - 30.05.2002...
  • Page 2 Dear Customer, Thank you for purchasing one of our products. It is easy to use; but please read these instructions in order to obtain the best results. These instructions are only valid for the countries of destination, the identification symbols of which are marked on the appliance.
  • Page 3 Hob controls There are 12 settings giving a wide range of temperatures. Setting Suggested use Melting butter, chocolate etc. 1- 4 Heating small quantities of liquid and to keep dishes warm. 4 - 8 Heating foods, thawing deep-frozen foods, cooking fruits and vegetables.
  • Page 4 Cleaning To keep the surface clean and bright, we recommend you use a silicone conditioner. Used prior to jam making this will help to protect the surface of the hob. It is very important to clean the surface soon after every use, when the glass is still warm.
  • Page 5 TECHNICAL INSTRUCTIONS FOR THE INSTALLER The installation and service procedures given below may only be carried out by a competent technician. Failure to install the appliance correctly could be dangerous and invalidate any warranty or liability claims. The manufacturer cannot be held responsible for any damage to persons or property caused by incorrect installation or use of the appliance.
  • Page 6: Electrical Connection

    INSTALLATION 3) Electrical Connection This appliance must be installed by a qualified electrician to comply with the relevant Institute of Electrical Engineers (I.E.E.) regulations and also the local electricity supply company requirements. WARNING: THIS APPLIANCE MUST BE EARTHED Make sure that the mains characteristics (voltage, nominal, power, etc.) match the ratings indicated on the data plate on the hob base.
  • Page 7: Installation

    SERVICING Before doing any servicing, disconnect the appliance from the power supply. 7) Replacing parts To replace internal components it is necessary to remove the appliance from the worktop. Turn the hob over, loosen the screws and remove the base. It is possible to work on the plates, controls, clamps and input cable.
  • Page 8 RANGE Clarence Street, Royal Leamington Spa, Warwickshire, CV31 2AD, England. Tel: +44 (0) 870 789 5107 Fax: +44 (0) 1926 450526 E-mail: consumers@rangemaster.co.uk www.rangemaster.co.uk AGA FOODSERVICE GROUP...

Table of Contents