The Clock - Rangemaster Classic 110 Installation And User Manual

The clock

To set the correct time of day.
See the '2 Minute Tour' at the beginning of this
guide.
To time something that's cooking
(minute minder)
Press and hold as above. At the same time press
(-) or (+) until the time you want to cook for is
shown, as below.
You can check time remaining by pressing
and cancel the beeper by pressing
To stop automatically
Use when you have started the oven manually.
Press and hold as above. At the same time press
(-) or (+) until your required 'Stop Time' shows.
AUTO will show in the display. When your
cooking is finished the beeper sounds. TURN
THE OVEN KNOB TO 0 FIRST, then press
once to stop the beep, press
manual cooking.
again to return to
13
To start and stop the oven automatically
Before you set the clock, you must have two
numbers clearly in mind.
The 'cook period', which is the period of time
you want the oven to cook.
The 'stop time', which is the time of day you
want the oven to stop cooking.
You cannot set a start time directly - this is set
automatically by setting the cooking period and
stop time.
Press and hold as above. At the same time
press (-) or (+) until your required 'cook period'
shows.
Then press and hold as above. At the same
time press (-) or (+) until your required 'stop
time' shows.
AUTO will show in the display.
Set the oven to the required temperature.
When your cooking is finished the beeper
sounds. TURN THE OVEN KNOB TO 0 FIRST,
then press once to stop the beep, press
again to return to manual cooking.
If you are out, don't worry about the beeper
going off, it stops after a while. When you
return, TURN THE OVEN KNOB TO 0 FIRST,
then press twice, to return to manual
cooking.
AUTO is showing, you want to reset to
manual cooking.
When cancelling an automatic setting, any
cooking time already set must be returned to
0.00 before you can return to manual, by
pressing the button.