The Fcc Wants You To Know - Radio Shack DX-396 Owner's Manual

Am/sw/fm stereo pll portable receiver
Table of Contents

Advertisement

Problem
Clock flashes.
Tuning does not stop.
Scan tuning does not
stop.

THE FCC WANTS YOU TO KNOW

Your RadioShack DX-396 AM/SW/FM-Stereo PLL Portable Receiver might cause
television or radio interference even when it is operating properly. To determine
whether your receiver is causing the interference, turn it off. If the interference goes
away, your receiver is causing the interference.
To try to eliminate the interference:
• Reorient the DX-396 receiver's antenna.
• Move your DX-396 receiver away from the television or radio receiver.
• Connect your DX-396 receiver to an outlet that is on a different electrical circuit
from the television or radio receiver.
• Contact your local RadioShack store for assistance.
If you cannot eliminate the interference, the FCC requires that you stop using your re-
ceiver.
18
Probable Cause
The receiver had a power inter-
ruption.
The sensitivity switch is set to
LOCAL. If the signal is weak,
the receiver does not stop in
LOCAL.
• Receiver is set to memory
scan.
• No
incoming
scans in LOCAL.
Set the time.
Set it to DX.
• Press SCAN or press the
number key.
signal
or
• Set it to DX.
Solution

Advertisement

Table of Contents
loading

Table of Contents