Highway Patrol Priority Channels - Radio Shack PRO-2051 User Manual

1,000-channel triple trunking mobile/base scanner
Table of Contents

Advertisement

Beyond the Basics
muting the alert tone
To temporarily mute the alert tone, press MUTE during
a highway warning alert. The alert tone stops and MUTE
fl ashes until the alarm cycle fi nishes (3 minutes). To mute all
alerts, hold down MUTE for 2 seconds. The scanner beeps
twice and MUTE lights. Mute automatically resets when you
turn your scanner off.
adjusting alert
ALERT has three settings: Bright, Dim, and Off. Repeatedly
press FLASH to select Bright, Dim or Off. ALERT fl ashes and
the alert tone beeps. If you select Off, FLASH appears to
remind you that ALERT is off.
Turning off ALERT and muting the alert tone turns off the
Note
Note
highway warning alert.
skip frequencies
To skip a frequency, press L/O. You can program up to 50
skip frequencies into the highway patrol priority frequency
channel. You can also program up to 100 skip frequencies
for other frequencies (see "Frequency Skip"). If you change
the state code, skipped frequencies are cancelled as soon as
scanning starts.

highway patrol priority channels

Each state preprogrammed in the scanner contains a
number of highway patrol priority channels. Your scanner
automatically checks a state's priority channels every 2
seconds for activity. If there is activity on one of the priority
channels, ALERT fl ashes and the alarm tone beeps (see
"Highway Warning Alert"). You will experience a slight
interruption in the conversations you hear as the scanner
checks the priority channels. You can cancel the priority
36

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

20-426

Table of Contents