Related Manuals for Gigaware Gigaware 16-952
Summary of Contents for Gigaware Gigaware 16-952
- Page 1 16-952 User’s Guide 7” Digital Photo Frame Please read this user’s guide before using your new photo frame.
-
Page 2: Package Contents
Package contents • Photo Frame • User’s Guide Features • 16Mb built-in flash memory stores up to 14 pictures • Add additional pictures with the 4-in-1 Card Slot (supports up to 8GB memory card) Power Your Photo Frame Connect the supplied AC adapter to the DC 5 V jack and plug in to a standard household outlet. • AC Adapter • Quick Start SD/MMC/XD/MS memory card slot Insert a memory card. DC 5V Plug in the supplied AC adapter. - Page 3 Position Your Photo Frame Keep the frame away from strong magnets, heat sources, direct sunlight, or excessive dust. Hanging Slots Hang your frame vertically or horizontally. Adjustable Stand Pull down and rotate to position the frame vertically or horizontally.
- Page 4 Set Your Photo Frame Options To define frame settings, complete the following steps: 1. Press MENU to enter the main menu. 2. Press PREV, NEXT, UP, or DOWN to navigate to SETUP and press PLAY/PAUSE/MODE. The setup menu appears. . Use the PREV, NEXT, UP, or DOWN buttons to navigate to a setting. . Use PLAY/PAUSE/MODE and NEXT to select options. Navigate through the following options using the PREV, NEXT, UP, or DOWN buttons: Brightness: –3 to +3 Slide Show Time: 5, 10, or 30 seconds display time for each photo. OSD Language: English, French, or Spanish. Default: Restores all options to factory settings. Exit Setup Menu: Return to the main menu. 5. Press PLAY/PAUSE/MODE to confirm your settings.
- Page 5 POWER Turn the frame on or off. PLAY/PAUSE/MODE Select functions. MENU Access the main menu. UP/COPY/DELETE Navigate to, copy, or delete a photo. DOWN/ROTATE Navigate to or rotate a photo. PREV Navigate to or view the previous photo. NEXT Navigate to or view the next photo.
- Page 6 Viewing Photos on Your Frame Your frame can read memory cards up to 8GB. It automatically displays saved photos and photos from a memory card in the SD/MMC/XD/MS slot. 1. Press the POWER button to turn on the frame. 2. Insert a memory card into the labeled slot. The frame enters Slide Show mode after several seconds. . Press PLAY/PAUSE/MODE to enter Browse mode. The frame displays a single image. Use the PREV and NEXT buttons to select a photo. . Press PLAY/PAUSE/MODE again to enter Thumbnail mode. Small images of the memory card’s contents appear. Use the PREV, NEXT, UP, and DOWN buttons to navigate the pictures. Note: The aspect ratio of the screen is 16:9. Photos with different ratios (for example, 5 × 7 or 4 × 6 photos) appear with black bars on the sides.
- Page 7 Copying Photos to Your Frame To copy photos from a memory card to your frame’s memory: 1. Locate the photo and press UP/COPY/DELETE. 2. Select YES when asked if you want to copy the photo, then press PLAY/PAUSE/MODE. The frame can copy up to 14 photos to the frame’s memory. Note: You can rotate photos clockwise by pressing ROTATE repeatedly while the photo is on-screen. Rotated photos are copied in the rotated position. Deleting Photos from your Frame To delete a photo from your frame’s memory: 1. Remove your memory card from your photo frame.
-
Page 8: Specifications
Cautions and Warnings • Do not insert any foreign objects into the frame through openings; do not spill or spray any liquids on or in the frame (this may result in a fire or electric shock). Do not place any- thing heavy on the frame. • To ensure proper ventilation and proper operation, never cover or block slots or openings. Keep the frame away from open flames, such as fires or candles. Do not use the frame in temperatures higher than 95°F/35°C. • When cleaning, make sure the frame is unplugged from the power source. Do not use liquid cleaners or aerosol clean- ers. Use a cloth lightly dampened with water for cleaning the housing only. • To avoid damaging your photo frame, use the provided power adapter or an adapter with proper specifications. Specifications File format ...JPEG Screen Resolution ... 480 × 234 Power source ..DC 5V 1A Compatible RAM ... SD/MMC/XD/MS Operating temperature ...40 – 98°F (5 – 35°C) Dimensions (W × H × D) ... 10 × 7 .6 × 1.5 in ...(25.5 × 19.3 × 39 cm) Specifications are subject to change and improvement without notice. Actual product may vary from the images found in this document. -
Page 9: Fcc Information
FCC Information This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installa- tion. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interfer- ence will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by Ignition L.P . may cause interference and void the user’s authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation Limited Warranty Ignition L.P . warrants this product against defects in materials and workmanship under normal use by the original purchaser for ninety (90) days after the date of purchase. IGNITION L.P . MAKES NO OTHER EXPRESS WARRANTIES. This warranty does not cover: (a) damage or failure caused by or attributable to abuse, misuse, failure to follow instructions, improper installation or maintenance, alteration, accident, Acts of God (such as floods or lightning), or excess voltage or current; (b) improper or incorrectly performed repairs by persons who are not a Ignition L.P . Authorized Service Facility; (c) consumables such as fuses or batteries; (d) ordinary wear and tear or cosmetic damage; (e) transportation, shipping or insurance costs; (f) costs of product removal, installation, set-up service, adjust- ment or reinstallation; and (g) claims by persons other than the original purchaser. - Page 10 of the original warranty period. You will be charged for repair or replacement of the product made after the expiration of the warranty period. IGNITION L.P . EXPRESSLY DISCLAIMS ALL WARRANTIES AND CONDITIONS NOT STATED IN THIS LIMITED WARRANTY. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY AND, IF APPLICABLE, THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, SHALL EXPIRE ON THE EXPIRATION OF THE STATED WARRANTY PERIOD. EXCEPT AS DESCRIBED ABOVE, IGNITION L.P . SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO THE PURCHASER OF THE PRODUCT OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE AND ANY LOSS OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT AND ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF IGNITION L.P . HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some States do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights which vary from State to State. You may contact Ignition L.P . at: Ignition L.P ., 3102 Maple Ave. Suite 450, Dallas, TX 75201 For product support, call 1-866-315-0426 Protect the environment by recycling used electronics. Go to E-CyclingCentral.com to find an electronic recycling center near you. © 2009. Ignition L.P . All rights reserved. Gigaware is a trademark used by Ignition L.P . Printed in China 02/09 07A09 16-952...