Power Your Radio; Install Backup Batteries - Radio Shack 12-519 User Manual

Power your Radio

Connect the supplied AC adapter to the DC 12 V jack and plug in to a
standard household outlet.

Install Backup Batteries

1. Open the battery compartment cover.
2. Slide the RCH/ALK switch to RCH for
rechargeable or ALK for alkaline backup
batteries.
. Install six AA alkaline or Ni-MH rechargeable
batteries (neither supplied). Insert batteries
as indicated by the polarity symbols (+ and –)
marked inside.
n
Notes:
• flashes when the rechargeable batteries
are charging,
finished. Charging can take up to 30 hours.
• If the radio's power supply is switched from AC to battery operation, the
three alert LEDs will blink for 3 minutes.
b
Battery Notes:
or
• When
• Use only fresh batteries of the required size and type.
• Dispose of old batteries promptly and properly. Do not burn or bury them.
• Do not mix old and new batteries, different types of batteries (standard,
alkaline, or rechargeable), or rechargeable batteries of different capacities.
• If you do not plan to use your radio for a long period, remove the batteries.
Batteries can leak chemicals that may damage electronic parts.
Recycle Rechargeable Batteries
Placing rechargeable batteries in the trash can be harmful to the environment. Instead,
recycle old rechargeable batteries at your local RadioShack store free of charge.
RadioShack participates in the RBRC
preserving the environment and conserving natural resources. Call 1-800-THE-SHACK (1-800-843-
7422) for more information.
will appear when charging is
displays, replace the batteries.
battery recycling program, and is committed to
©

RCH/ALK