Advertisement
Quick Links
Specifications
Screen Size:
13 inch 4:3TFT
System:
PAL/NTSC
Display Method:
TFT Active matrix system
Power source/Consumption: DC12V+/-20%, 15W
Storage Temperature:
-10
Display Method :
Color LCD
Monitor dimension:
325x275x30mm
Pixs:
800x600
Weight:
900g
Cautions
Never connect the car adaptor to cigarette lighters for such as trucks
o r buses which use 12V DC power.
Do not expose the monitor to high humidity, dust, steam,oily smoke,
direct sunlight etc.
For your safety, turn power OFF when not in use and unplug the adaptor.
Never attempt your own maintenance. Consult your TV dealer or the
company.
Avoid dropping and strong impact.
For your safety, the driver should not watch the Monitor or operate the
controls while driving.
Accessories
1xRemote control
WARNING:
DO NOT WATCH MONITOR WHILE VEHICLE IN MOTION.
IT CAN BE HAZARDOUS.
~ +85
1xinstruction manual
5
13 TFT LCD COLOR MONITOR
Instruction Manual
WARNING:
HAZARD DO NOT OPERATE THIS
UNIT UNLESS VEHICLE IS PARKED
IN SAFE AND LEGAL AREA
PLVW1342
Advertisement
Related Manuals for PYLE Audio PLVW1342
Summary of Contents for PYLE Audio PLVW1342
-
Page 1: Specifications
1xRemote control 1xinstruction manual WARNING: DO NOT WATCH MONITOR WHILE VEHICLE IN MOTION. IT CAN BE HAZARDOUS. 13 TFT LCD COLOR MONITOR Instruction Manual WARNING: HAZARD DO NOT OPERATE THIS UNIT UNLESS VEHICLE IS PARKED IN SAFE AND LEGAL AREA PLVW1342... - Page 2 REMOTE CONTROL BATTERY Back of the remote 1.Always use new batteries when replacing the old set . 2. Do not attempt to charge ,short-circuit ,disassemble ,heat or burn used batteries. 3.Battery replacement is necessary when remote control acts sporadically or stops operating this device. 4.Do not place objects between the remote control and remote receiver.
-
Page 3: Wiring Diagram
Pannel 1.LED 3.AV1 9.IR 11.Monitor release button REMOTE CONTROL 1.Power ON/OFF the monitor 2.Contrast positive adjustment 3.Switch between V1 and V2 4.Brightness positive adjustment 5.Brightness negative adjustment 6.Contrast negative adjustment 7.Saturation negative adjustment 8.Saturation positive adjustment WIRING DIAGRAM authorized dealer. 1.Disconnect the negative(-) lead of the battery before making any power 2.When creating passage holes for the power wires ,use grommets to eliminate 3.When connecting the ground lead ,fasten the ground lead(black) securely to a...