How To Fold And Move The Treadmill - ProForm 725 TL 831.297763 User Manual

Proform user manual treadmill 831.297763
Table of Contents

Advertisement

HOW TO FOLD AND MOVE THE TREADMILL

HOW TO FOLD THE TREADMILL FOR STORAGE
Before folding the treadmill, adjust the incline to the lowest
position. If the incline is not at the lowest position, the
treadmill will be permanently damaged. Next, unplug the
power cord. Caution: You must be able to safely lift 45
pounds (20 kg) in order to raise, lower, or move the
treadmill.
1. Hold the treadmill with your hands in the locations shown
at the right. Caution: To avoid pinching your hands, do
not hold the treadmill in the locations indicated by the
arrows. To decrease the possibility of injury, bend
your legs and keep your back straight. As you raise
the treadmill, make sure to lift with your legs rather
than your back. Raise the treadmill about halfway to the
vertical position.
2. Move your right hand to the position shown and hold the
treadmill firmly. Raise the treadmill until the storage latch
closes over the frame guide. Make sure that the storage
latch closes fully over the frame guide.
To protect the floor or carpet from damage, place a
mat under the treadmill. Keep the treadmill out of di-
rect sunlight. Do not leave the treadmill in the storage
position in temperatures above 85° Fahrenheit.
THE WOODGRAIN-FINISH COVER PANEL
When the treadmill is in the storage position, the woodgrain-
finish cover panel will accent the decor of your room. If
desired, you can remove the cover panel to display the
black-finish frame cover instead. To remove the cover panel,
simply insert your fingers between the lower end of the cover
panel and the frame cover (see the arrow at the right). Pull
the cover panel off the panel fasteners, working your way up
until the cover panel is removed.
After the cover panel is removed, the panel fasteners can be
removed for a cleaner appearance. Using a phillips head
screwdriver, remove one of the panel screws and panel
fasteners from the frame cover. Tighten the panel screw
back into the frame cover. Repeat this process, removing
one panel fastener at a time, until all six panel fasteners
are removed. Press the removed panel fasteners onto the
fasteners on the back of the cover panel. Store the cover
panel away from moisture and dust.
18
Do not hold here
Storage
Latch
Frame
Guide
Cover Panel
Frame Cover
Panel
Fastener
Frame
Cover
Panel Screw
Cover Panel
Fastener
Closed
Panel
Fastener

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

725 tl831.297763

Table of Contents