Appendix G : Vsib Installation; Figure 1F : Vsi-Pro Front Panel; Figure 2F : Vsib Front Panel; Figure 3F : Vsib Rear Panel - AVE VSI-PRO Operation Manual

APPENDIX G
VSIB for Thai, Korean or Chinese Languages
The VSIB is a bit-mapped display device that can display Thai, Korean, or Chinese characters. This device works in
conjunction with the VSI-Pro. A special cable is connected between the VSI-Pro and the VSIB so all on-screen
programming is done via the VSIB but the controls and menus are the same as the VSI-Pro. Therefore after connec-
tion, the programming will be identical to this manual. The VSIB must be ordered independently for any of the above
supported languages and the language must be specified.
Figure 1F: VSI-Pro Front Panel
Figure 3F: VSIB Rear Panel
Disconnect the stan-
dard VSI-Pro and plug
its cable into the female
connector of the Triport.
Figure 5F: Cable Connection to VSIB
VSI-Pro VIDEO SERIAL INTERFACE
The pin-out for the VSIB between the VSI-Pro and the VSIB
is as follows:
Use the BNC
connectors of
the VSIB for
your Video Input
& Output
66
Figure 2F: VSIB Front Panel
Serial Input Power Video Input
Figure 4F: VSIB Connection Cables
VSIB ( DB-9M )
TXD 3
RTS 7
GND 5
Figure 6F: Pin-Out for VSIB to VSI-Pro
VSIB INSTALLATION
Video Output
VSI-Pro ( DB-9M )
2 RXD
8 CTS
5 GND