AVE VSI-PRO Operation Manual page 44

PROGRAMMING
NOTE
In any of the above tests, you can stop the scrolling data by holding down either "Up"
or "Down" button.
RX / TX TEST
In the RX/ TX test the VSI-Pro echos whatever it receives. Press the "Up" or "Down" button to move the cursor to "RX/
TX TEST" and press "Set". The following display will appear (example only):
Press "Set" to return to the previous menu.
BAUD RATE SCAN
The Baud Rate Scan test can scan the baud rate of your register. Press the "Up" or "Down" button to move the cursor
to "BAUD RATE SCAN" and press "Set". The following display will appear (example only):
Enter a transaction from the register. The VSI-Pro will detect the baud rate and display it in front of RX Baud rate.
Press "Set" to return to the previous menu.
EXIT
Press the "Up" or "Down" button to move the cursor to "EXIT" and press "Set" to return to the previous menu.
VSI-Pro VIDEO SERIAL INTERFACE
RX BAUDRATE :
TX BAUDRATE :
PARITY :
DATA BIT :
HANDSHAKING :
ECHOING :
BAUDRATE DETECTION..
Figure 73: RX /TX TEST Display
RX BAUDRATE :
TX BAUDRATE :
PARITY :
DATA BIT :
HANDSHAKING :
BAUDRATE SCAN :
BAUDRATE DETECTION..
Figure 74: Baudrate Scan Display
44
AUTO
2400
NONE
8
OFF
AUTO
2400
NONE
8
OFF