Poulan Pro 115224926 Instruction Manual
  1. Manuals
  2. Brands
  3. Poulan Pro Manuals
  4. Pole Saw
  5. 115224926
  6. Instruction manual

Poulan Pro 115224926 Instruction Manual

Pole saw / trimmer
Hide thumbs
Table of Contents

Advertisement

Quick Links

Please do not return unit to retailer.
Por favor, no devuelva el aparato al lugar de compra.
Veuillez ne pas retourner l'outil au détaillant.
For Occasional Use Only
WARNING:
Read and follow all Safety Rules and Operating Instructions before
using this product. Failure to do so can result in serious injury.
ADVERTENCIA:
Lea el manual de instrucciones y siga todas las advertencias e
instrucciones de seguridad. El no hacerlo puede resultar en le-
siones graves.
AVERTISSEMENT:
Lire le manuel d'instructions et bien respecter tous les avertisse-
ments et toutes les instructions de sécurité. Tout défaut de le
faire pourrait entraîner des blessures graves.
Poulan PRO
7349 Statesville Road
Charlotte, NC 28269
1- -800- -554- -6723
www.poulan- -pro.com
Instruction Manual
Manual de Instrucciones
Manuel d'Instructions
Mississauga, Ontario L5V 0B4
115224926
PP338PT
Poulan PRO
850 Matheson Blvd. West
Rev. 1
9/15/09 BRW
R

Advertisement

Table of Contents
loading

Related Manuals for Poulan Pro 115224926

Summary of Contents for Poulan Pro 115224926

  • Page 1 Please do not return unit to retailer. Por favor, no devuelva el aparato al lugar de compra. Veuillez ne pas retourner l’outil au détaillant. 1- -800- -554- -6723 www.poulan- -pro.com Manual de Instrucciones For Occasional Use Only WARNING: Read and follow all Safety Rules and Operating Instructions before using this product.

  • Page 2: Identification Of Safety Symbols

    0.080 inch (2 mm) recommended trimmer line. Never use blades, flailing devices, wire, rope, string, etc. This attachment is designed for line trimmer use only. Failure to follow these instructions may result in serious injury. WARNING: Do not operate pruner from a ladder or unstable support.
  • Page 3 IDENTIFICATION OF SAFETY SYMBOLS Trimmer line can throw objects violently. You can be blinded or injured. Wear protective gear. Always use steel-toed safety footwear with non-slip soles; snug-fitting clothing; heavy, long pants, and long sleeves; heavy-duty, non-slip gloves; eye protection marked Z87 such as non-fogging, vented goggles or face screen;...
  • Page 4 IDENTIFICATION OF SAFETY SYMBOLS Assist handle to be positioned only below the arrow. Never allow children to operate this unit. Store unit indoors in a high, dry place out of the reach of children. When servicing unit, use only identical replacement parts.

  • Page 5: Safety Rules

    Remove objects (rocks, broken glass, nails, wire, etc.) which can be thrown by or become entangled in line. Hard objects can damage the trimmer head and be thrown causing serious injury. S Keep children, bystanders, and animals 50 feet (15 meters) away.

  • Page 6: Kickback Warning

    S Maintain unit according to recommended procedures. Keep cutting line at proper length. S Use only 0.080″ (2 mm) diameter Poulan PRO brand line. Never use wire, rope, string, etc. S Install required shield properly before using the unit.

  • Page 7: Safety Notice

    the bar (plunge cuts). S Watch for shifting of wood or other forces that could close a cut and pinch or fall into chain. S Use the Reduced- -Kickback Guide Bar and Low- -Kickback Chain specified for your unit. MAINTAIN CONTROL S Keep a good, firm grip on the pruner with both hands when the engine is running and don’t let go.

  • Page 8: Edger Safety

    Blade can thrust violently away from material it does not cut. Blade thrust can cause amputation of arms or legs. WARNING: Do not use trimmer head as a fastening device for the blade. WARNING: The blade continues to spin after the trigger is released or engine is turned off.
  • Page 9 The tines become very sharp from use. S Do not run unit at high speed unless culti- vating. HEDGE TRIMMER SAFETY DANGER: HANDS AWAY FROM BLADE - - Blade moves momentarily after the trigger is re- leased or engine is turned off. Do not attempt to clear away cut material when the blade is in motion.
  • Page 10 Finding fuel or oil residue on muffler is normal due to carburetor adjustments and testing done by the manufacturer. TOOLS REQUIRED S Hex wrench (provided) INSTALLING PRUNER OR LINE TRIMMER ATTACHMENTS CAUTION: When removing or installing at- tachments, place the unit on a flat surface for stability. NOTE:...
  • Page 11 1. Loosen wing nut on handle. 2. Rotate the handle on the shaft to an up- right position; retighten wing nut. ATTACHING SHIELD (FOR LINE TRIMMER ATTACHMENT) WARNING: erly installed. The shield provides partial protec- tion from the risk of thrown objects to the opera-...

  • Page 12: Operation

    2-cycle air-cooled engine oil designed to be mixed at a ratio of 40:1. Poulan/WEED EATER brand synthetic oil is recommended. Mix gasoline and oil at a ratio of 40:1. A 40:1 ratio is obtained by mixing 3.2 fluid ounces (95 ml) of oil with 1 gallon (4 liters) of unleaded gasoline.

  • Page 13: Starting A Flooded Engine

    Genuine Poulan or Poulan PRO bar and chain oil is recommended to protect your unit against excessive wear from heat and fric- tion. Poulan or Poulan PRO oil resists high temperature thinning. If Poulan or Poulan PRO bar and chain oil is not available, use a good grade SAE 30 oil.

  • Page 14: Operating Instructions

    WARNING: Always stop unit and dis- connect spark plug before removing or instal- ling attachments. REMOVING PRUNER ATTACH- MENT, LINE TRIMMER ATTACH- MENT, OR OTHER OPTIONAL AT- TACHMENTS CAUTION: When removing or installing at- tachments, place the unit on a flat surface for stability.

  • Page 15: Important Points

    Heavy shoes Cut from your right to your left. WARNING: Always wear eye protec- tion. Never lean over the trimmer head. Rocks or debris can ricochet or be thrown into eyes and face and cause blindness or other serious injury.

  • Page 16: Cutting Methods

    S Operate the engine at full throttle. S Hold the trimmer head parallel to and above the grassy area. S Tap the bottom of the trimmer head lightly on the ground one time. Approximately 2 inches (5 cm) of line will be advanced with each tap.

  • Page 17: Maintenance

    If any dealer other than an authorized service dealer performs work on the product, Poulan PRO may not pay for repairs under warranty. It is your re- sponsibility to maintain and perform general maintenance.

  • Page 18: Service And Adjustments

    1. Clean the cover and the area around it to keep dirt from falling into the carburetor chamber when the cover is removed. 2. Loosen knob by turning counterclock- wise. Remove air filter cover and air filter. NOTE: To avoid creating a fire hazard or producing harmful evaporative emissions, do not clean filter in gasoline or other flammable solvent.

  • Page 19: Chain Replacement

    TO SHARPEN CHAIN: 1. Disconnect spark plug. 2. Check chain for proper tension. Adjust chain tension if necessary. See CHECK CHAIN TENSION section. 3. Sharpen cutters. S To sharpen the cutters, position the file holder level (90˚) so that it rests on the top edges of the cutter and depth gauge.

  • Page 20: Chain Adjustment

    MENT section. CHAIN ADJUSTMENT See CHECK CHAIN TENSION in MAINTE- NANCE section. REPLACING THE LINE 1. Press the tabs on the side of the trimmer head and remove cover and spool. Depth Gauge Cover 2. Remove any remaining line. 3. Clean dirt and debris from all parts. Re- place spool if it is worn or damaged.
  • Page 21 10. Insert the ends of the lines through exit holes in the sides of the cover. Slot 11. Reinstall the spool and cover onto the trimmer head. Push until cover snaps into place. Guide slot REPLACING THE TRIMMER HEAD 1. Hold the dust cup with a wrench to keep the shaft from turning while removing and installing trimmer head.

  • Page 22: Seasonal Storage

    CARBURETOR IDLE SPEED ADJUSTMENT WARNING: Keep others away when making idle speed adjustments. The chain will be moving during most of this procedure. Wear your protective equipment and observe all safety precautions. After making adjust- ments, the chain must not move at idle speed. The carburetor has been carefully set at the factory.

  • Page 23: Troubleshooting Table

    ENGINE S Remove spark plug and pour 1 teaspoon of 40:1, 2-cycle engine oil (air cooled) through the spark plug opening. Slowly pull the starter rope 8 to 10 times to distribute oil. S Replace spark plug with new one of recom- mended type and heat range.

  • Page 24: Limited Warranty

    This is a limited warranty within the meaning of that term as defined in the Magnuson- -Moss Act of 1975. The policy of Poulan PRO is to continuously improve its products. PRO reserves the right to change, modify, or discontinue models, designs, specifications, and accessories of all products at any time without notice or obligation to any purchaser.
  • Page 25 30 days. If you have any questions regarding your war- ranty rights and responsibilities, you should contact your nearest authorized service center, call Poulan PRO at 1- -800- -554- -6723, or send e-mail correspondence to emission.warranty @HCOP- -emission.com. WARRANTY COMMENCEMENT DATE:...

This manual is also suitable for:

Pp338pt

Table of Contents