Poulan Pro 410237 Operator's Manual

Rear tine tiller

Advertisement

IMPORTANT MANUAL
OPERATOR'S MANUAL
MODEL:
DRT875
REAR TINE TILLER
ALWAYS WEAR EYE PROTECTION DURING OPERATION
Visit our website: www.poulan-pro.com
Do Not Throw Away
WARNING:
Read this Man u al and follow all Warnings and
Safety Instructions. Fail ure to do so can re sult
in serious in ju ry.
410237
01.03.07 CL
Printed in U.S.A.

Advertisement

Table of Contents
loading

Summary of Contents for Poulan Pro 410237

  • Page 1 MODEL: DRT875 REAR TINE TILLER ALWAYS WEAR EYE PROTECTION DURING OPERATION Visit our website: www.poulan-pro.com Do Not Throw Away WARNING: Read this Man u al and follow all Warnings and Safety Instructions. Fail ure to do so can re sult in serious in ju ry.
  • Page 2: Safety Rules

    Allow the engine to cool before storing in any enclosure. • Always refer to the operator’s guide instructions for im por tant details if the tiller is to be stored for an ex- tended period. - IMPORTANT - CAUTIONS, IMPORTANTS, AND NOTES ARE A MEANS OF ATTRACTING ATTENTION TO IMPORTANT OR CRIT I CAL IN FOR MA TION IN THIS MANUAL.
  • Page 3: Table Of Contents

    We have com pe tent, well-trained tech ni cians and the proper tools to service or repair this unit. Please read and retain this manual. The in struc tions will enable you to assemble and main tain your tiller prop erly. Always observe the “SAFETY RULES”. TABLE OF CONTENTS SAFETY RULES ...2...
  • Page 4: Assembly

    Your new tiller has been assembled at the factory with exception of those parts left unassembled for shipping purposes. To ensure safe and proper operation of your tiller all parts and hardware you assemble must be tightened securely. Use the correct tools as necessary to insure proper tightness.
  • Page 5 LOCK LEVER TO MOVE • Rotate handle assembly down. Insert rear carriage bolt first, with bolt head on L.H. side of tiller and loosely assemble locknut (See Fig. 5). • Insert pivot bolt in front part of plate and tighten.
  • Page 6 • Tilt tiller forward by lifting handle. Separate cardboard cover from leveling shield. • Rotate tiller handle to the right and pull tiller out of carton. CHECK TIRE PRESSURE The tires on your unit were overinflated at the factory for shipping purposes.
  • Page 7: Operation

    KNOW YOUR TILLER READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TILLER. Compare the illustrations with your tiller to familiarize yourself with the location of various controls and adjustments. Save this manual for future reference. These symbols may appear on your Tiller or in literature supplied with the product. Learn and understand their meaning.
  • Page 8 The operation of any tiller can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields before starting your tiller and while tilling. We recommend a wide vision safety mask for over spectacles or standard safety glasses.
  • Page 9 AROUND THE YARD • Release the depth stake pin. Move the depth stake down to the top hole for transporting the tiller. Place “LOCKED” depth stake pin in hole of depth stake to lock in posi- POSITION tion.
  • Page 10 Loose, unpacked soil helps root growth. Best tilling depth is 4" to 6" (10-15 cm). A tiller will also clear the soil of unwanted vege ta tion. The de com po si tion of this vegetable mat ter enriches the soil.
  • Page 11: Operation

    (See Fig. 16). • Do not lean on handle, this takes weight off the wheels, reduces traction, and may cause the tiller to skip over the ground. • Always lower the drag stake when using the for ward rotating tine drive.
  • Page 12: Maintenance Schedule

    2 - Service more often when operating in dirty or dusty conditions. GENERAL RECOMMENDATIONS The warranty on this tiller does not cover items that have been subjected to operator abuse or negligence. To receive full value from the warranty, the operator must main tain tiller as instructed in this manual.
  • Page 13: Maintenance

    Change the oil after every 25 hours of operation or at least once a year if the tiller is not used for 25 hours in one year. Check the crankcase oil level before starting the engine and after each five (5) hours of continuous use.
  • Page 14 Air Screen fil ter and car bu re tor are cov ered to keep wa ter out. Wa ter in en gine will short en the useful life of your tiller. • Clean engine, wheels, finish, etc. of all foreign mat- ter.
  • Page 15: Service & Adjustments

    FIG. 24 TO REMOVE BELT GUARD (See Fig. 25) NOTE: For ease of removal, remove hairpin clip and clevis pin from left wheel. Pull wheel out from tiller about 1 inch. • Remove two (2) screws from side of belt guard.
  • Page 16: Service And Adjustments

    SERVICE AND ADJUSTMENTS TO REPLACE GROUND DRIVE BELT (See Figs. 25 and 26) • Remove belt guard as described in “TO REMOVE BELT GUARD”. • Remove old belt by slipping off engine pulley first then remove from transmission pulley. • Place new belt in groove of transmission pulley and into engine pulley.
  • Page 17: Tine Replacement

    A badly worn tine causes your tiller to work harder and dig more shallow. Most important, worn tines cannot chop and shred organic matter as effectively nor bury it as deeply as good tines.
  • Page 18: Service & Adjustments

    SERVICE AND ADJUSTMENTS ENGINE TO ADJUST THROTTLE CONTROL CABLE (See Fig. 30) The throttle control has been preset at the factory and ad just ment should not be necessary. If adjustment is necessary, proceed as follows: • With engine not running, move remote throttle control lever to “FAST”...
  • Page 19: Storage

    Immediately prepare your tiller for storage at the end of the season or if the unit will not be used for 30 days or more. CAUTION: Never store the tiller with gasoline in the tank inside a build ing where fumes may reach an open flame or spark.
  • Page 20: Troubleshooting

    Briefly engage drive control bar and release or rock tiller forward and back ward until are able to shift gears. Shift to either counter rotating till position or forward rotating till position.
  • Page 21: Warranty

    6. In the event you have a claim under this Warranty, you must return the product to an authorized service deal- Should you have any unanswered questions concerning this Warranty, please contact: Poulan Pro Outdoor Products Customer Service Dept. 1030 Stevens Creek Road...
  • Page 22: Parts And Service

    Model Number/Manufacturer's I.D. Number b. Description of part. For Technical Assistance: call 1-800-829-5886 For a Parts Manual, go to our website: www.poulan-pro.com/support.asp NOTE: HOP provides parts and service through its au thor ized dis tribu tors and dealers; there fore, all requests for parts and service should be directed to your local dealer(s).
  • Page 23 à mises votre S.V.P contactez Manuel, caractéristiques produits. philosophie proche. plus pièces mande toute conséquent l’intermédiaire www.poulan-pro.com/support.asp 1-800-849-1297 appelez autorisé: d’effectuer machine votre durabilité pour Comme stricts. dards stan CHANGE concernant l’assistance tions dans décrites celles différentes complète gamme nence agréé...
  • Page 24 à s’applique ci-dessus énoncées durée conséquents dommages GARANTIES POUR PRÉCISÉES INCIDENTEL DOMMAGE votre d’achat date série, Ontario Mississauga, Terry 5855 Poulan Dept. contact: Canada plaît vous s’il garantie, cette concernant veuillez-vous garantie, cette garantie. normal, l’usage dents, adaptateurs livraison lors avariés...
  • Page 25 dents. avant. rotation labourage position rotation contre labourage position change déplacer possible qu’il avant braquante tige basculez d’entraînement commande barre subitement labouré. terrain oudu terrain utilisé être seulement avant marche rotation à dent draguer. tasseau cisaillement. boulon(s) carburateur. gaz. commande labourage pour roues...
  • Page 26 CHAUDS. D'ÉCHAPPEMENT CIRCUIT MOTOBINEUSE JAMAIS COUVREZ l'unité. rouiller à fera formation permet d’air circulation tique plas plastique. couverture ble. méa couverture avec motobineuse saleté. poussière protegér possible, l’intérieur, à motobineuse caus l’essence dans saleté et/ou rouiller. à commence s’il d’essence l’autre.
  • Page 27 REPARATIONS POUR APPROPRIES QUALIFIES TECHNICIENS DOMICILE.QUI PROCHE PLUS AGREE ’AGENT NECESSAIRE, MAXIMUM VITESSE QU’UN PENSEZ VOUS DANGEREUSE. CETTE VITESSE. CETTE JAMAIS DEPASSEZ ETRE DOIT MOTEUR LAQUELLE MAXIMUM VITESSE DETERMINE ’EQUIPEMENT CONSTRUCTEUR REGULATEUR TOUCHEZ proche. plus autorisé d'entretien avec quez nécessaire, réglage carburant température,...
  • Page 28 CHANT TRAN BORD FIG. DENT TRANSMISSION haut. tourneront aiguisés fraise bords illustré comme montées être devraient cas. suivant redresser, convient cm), pouces 3-1/2 entre l’écart transmission. côté fraises particulier gauchissement, l’acuité, point fraises fonctionnement, machine cette RÉGLAGES FIG. CHANT TRAN BORD CHEVEUX À...
  • Page 29 5/8" SION PLUS SION MOINS D’ENTRAÎNEMENT COMMANDE CÂBLE CÂBLE COLLIER câble. serrage collier engagée. barre pendant allongement d’un l’obtention jusqu’à tension arrière tension moins pour câble d’entraînement. fixe câble serrage collier suit: comme obtenue être peut tension gée position à d’entraînement lorsque allongement...
  • Page 30 FIG. CHAPE CHEVEUX À ÉPINGLE COLLIER ROUE) DERRIÈRE (SITUÉ RONDELLE ÉCROU RONDELLE BORGNE ÉCROU procédé rinversant courroie protecteur motobineuse. loin courroie pneu.) derrière teur fond rondelle hexagonal courroie. protecteur côté soit distance jusqu’à motobineuse Tirez gauche. roue chape l’axe collier enlevez l’enlèvement, faciliter...
  • Page 31 d’auto. cire avec peintes surfaces etc. l’huile, peintes surfaces roues propreté toutes etc. finition, roues, motobineuse. moteur niveau d’eau ’entrée d’eau. toute contre protégés sont carburateur silencieux transmission, machine nettoyer afin etc.) d’arrosage, l’eau utiliser mieux serait transmission moteur motobineuse graisse once avec...
  • Page 32 FIG. À FILTRE CARTOUCHE cartouche. sécher pour comprimé d’air N’uti d’huile mettez cartouche. détériora- risquent cartouche. pour utilisés être doivent tels pétrole, solvants vis. fond à Serrez couvercle. cartouche. remplacez avariée, plate. surface légèrement frappant dans entrer débris saletés Faites air.
  • Page 33 MOTEUR. ENTRETIEN SECTION 10W30 ROUE MOYEU NIVELLEMENT DÉFLECTEUR CHARNIÈRES PROFONDEUR JAUGE GOUPILLE VITESSE BOÎTE DROIT CÔTÉ GRAISSE RACCORD COMMANDE LUBRIFICATION élevée. ambiante D’ENTRETIEN DATES GRAISSE À RÉFÉREZ-VOUS MOTEUR HUILE portez GALET-TENDEUR BRAS fonctionner air/essence courroies nettoyez saison. Réglages MOTEUR pour périodiquement manuel.
  • Page 34 FIG. tire_2 PNEU INTÉRIEURE FIG. CHEVEUX À ÉPINGLE COLLIER CHAPE PNEU EXTÉRIEURE stabilité. meilleure dehors positionnées être doivent durant difficiles extrêmement conditions gauche. côté ci-dessus blocs. enlevez roue cheveux à épingle collier chape l’essieu. avec aligné soit roue intérieur jusqu’à (2,5 pouce d'environ...
  • Page 35 proche. plus bêché rang vous motobineuse Deuxièmement, faire prendre à faciles plus beaucoup virages Premièrement, ceci. faire 15). fig. (Voir labourage rang temps- passes. entre bêché vous facile plus beaucoup labourage l’opération ralentir autour s’enrouler celles-ci empêcher vignes enlevez l’automne, à...
  • Page 36 FIG. entretien section voir l’huile, manuel). section dans d’huile viscosité tableau devrait l’hiver, pendant facile à serrez moteur l'huile bouchon classification .I., d’A.P service doit l’huile Toute manuel. page TIONS «SPÉ section point jusqu’au remplie être devrait soit d’huile remplissage bouchon plat terrain...
  • Page 37 désirée. position à déplacée commande biner, Pour profond. plus (“FAST”) rapide position à commande fraises labourage. commencer contre d’entraînement commande labourage. à vitesse changement levier l’indicateur position. jauge trou dans profondeur jauge profondeur augmenter jauge Soulevez profondeur. jauge fig. (Voir FIG.
  • Page 38 froid. moteur démarrer à aider pour supplémentaire l'essence pompe D'AMORÇAGE l'enterrement. éviter té afin réglable EXTÉRIEUR LATÉRAL niveler pour employé NIVELLEMENT avent. marche vitese Controle auquel deur commande PROFONDEUR Institute”. Standards National (RECUL) DÉMARRAGE POIGNÉE ÇA D'AMOR DISPOSITIF HUILE ESSENCE ÊTRANGLEUR ARRÊT MARCHE...
  • Page 39 manuel.) section HAUTEUR “REGLER section à venir pour réglée être peut poignée POIGNEE PSI). kg/cm à pneu pression meilleurs obtenir pour pneus deux pression l’expédition. pour l’usine à surgonflés PNEU PRESSION carton. enlever droite à motobineuse déflecteur carton couvercle levant devant vers motobineuse...
  • Page 40 FIG. FREIN ÉCROU PIVOT À BOULON POIGNÉE VERROU LEVIER PLATE RONDELLE basse. plus position l’ensemble laissant carton motobineuse facile plus sera montre. d’une aiguilles tournant poignée verrou levier basse plus position à poignée l’intérieur (à poignée socle l’encoche vers dents (les mince plus...
  • Page 41 pince cheveux à épingle Collier 3/8-16 frein Écrou FIG. ’OPÉRATEUR POSITION DROITE DEVANT outils. bons Utilisez fond. à serrées correcte utilisation d'une s'assurer Pour & cisaillement Boulons poignée verrou Levier Cat. 3/8-16 chariot Boulon PIÈCES CONTENU l'utilisateur GAUCHE sions MONTAGE être doivent assemblez...
  • Page 42 DÉPANNAGE 15-18 RÉGLAGES 12-14 PARE-ÉTINCELLES. PROCHE PLUS AUTORISÉ D’ENTRETIEN FONCTIONNEMENT MAINTENU UTILISÉ, PARE-ÉTINCELLES LOCALES LOIS EXIGENCES PARE-ÉTINCELLES D’UN MUNI SYSTÈME HERBES ARBRES, COUVERT TERRAIN ÊTRE DEVRAIT INTERNE MOTEUR D’UN MUNI MACHINE prié manuel Entretien sections dans instructions motobineuse. soin, d’entretien, habituel programme sécurité.
  • Page 43 reproducteur. système endommagement naissance, l’infirmité cancer, quantités, certaines dans lesquels, contiennent produit moteur Californie l’état AVERTISSEMENT réparations. ments port, trans tion, l’ins lors bougie avec contact trer qu’il çon telle sez-le dé pré pour toujours Débranchez TÉ SÉ VOTRE PRUDENT !!!, TION signifie...
  • Page 44 U.S.A. Printed 07.04.07 410237 sécurité. tions ments aver lisez résulter peuvent sérieuses bles- sécurité. tions ments aver tous soigneusement AVERTISSEMENT: JETEZ www.poulan-pro.com l’utilisation. lors sécurité struc vous sures struc suivez Lisez PROPRIÉTAIRE web: site notre Visitez lunettes toujours Portez MOTOBINEUSE DRT875 MODÈLE:...

This manual is also suitable for:

96092001000Drt875

Table of Contents