Identification Of Symbols; Starting Reminder; Chain Tensioning - Poulan Pro PP3516AVX, PP4218AVX Instruction Manual

Poulan pro chain saw instruction manual
Hide thumbs Also See for PP3516AVX, PP4218AVX:
Table of Contents

Advertisement

IDENTIFICATION OF SYMBOLS

WARNING!
This chain saw
can be dangerous! Careless or
improper use can cause serious
or even fatal injury.
Always wear appropriate
ear protection, eye protec-
tion and head protection.
Always use two hands when operating the chain saw.
WARNING!
ject should be avoided; tip contact may cause the guide
bar to move suddenly upward and backward, which may
cause serious injury.

Starting Reminder

Move ON/STOP switch to
the ON position.
Slowly press primer bulb
6 times.
Pull choke/fast idle lever
out to the full extent (to
the FULL CHOKE posi-
tion).
Pull the starter rope
sharply 5 times with your
right hand.
Push the choke/fast idle
lever in to the HALF
CHOKE position.
Pull the starter rope sharply
with your right hand until
the engine starts.
Read and understand the
instruction manual before
using the chain saw.
Measured maximum kick-
XX_
back value without chain
brake for the bar and chain
combination on the label.
Contacting the guide bar tip with any ob-

Chain Tensioning

Lift lever on bar knob and
turn counterclockwise 1 turn
to loosen bar clamp.
Turn adjusting wheel (downward
direction) to tension chain until
chain solidly contacts bottom of
guide bar rail.
While lifting tip of guide bar, tight-
en bar knob (clockwise) securely.
Hand tighten only! Return lever
on bar knob to original position.
2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents