Polaris Magnum 330 Owner's Manual page 84

MAINTENANCE AND LUBRICATION
Lubrication Recommendations
Item
(6) Demand 4
Hubs - All
Wheel Drive ATVs
(7) Front Drive
Axle (U Joint)
(AWD Models)
(8) Ball Joint
(9) Counter
Balance Housing
(400)
(10) Rear Axle
Bearing
(11) Swing Arm
Bushings
(12) Upper Con-
trol Arms
(13) Lower Con-
trol Arms
(14) Rear Wheel
Hub Bearing Car-
rier
(15) Rear Anti-
Roll Bar
More often under severe use, such as wet or dusty conditions
"
Polaris Premium All Season Grease or grease conforming to NLGI No. 2, such
L
as Conoco Superlube M or Mobilegrease Special
Use Polaris Premium U-Joint Lube every 500 miles, before long
F
periods of storage, or after pressure washing or submerging.
∆ When suspension action becomes stiff, or after washing
82
Lube
Premium Remove set screw in hubs. Rotate
Hub Lube wheels to 4 O'clock position. If lubri-
cant is not visible add more. Reinstall
set screw.
Grease Locate grease fitting and grease with
F
grease gun.
Locate fitting on back side of struts
L
"
and grease with grease gun.
Grease
Polaris Check level on dipstick and add oil as
Premium necessary. Change annually.
Synthetic
4-cycle or
SAE 10/30
Locate fittings and grease
L
"
Grease
Locate fittings on swing arm and
L
"
grease with grease gun.
Grease
Locate fittings and grease
L∆
"
Grease
Locate fittings and grease
L∆
"
Grease
Locate fitting and grease
L∆
"
Grease
Locate fitting and grease
"
Grease
Method Frequency
Annually or at
100 hrs.
Every 3
months or 50
hours
Every 3
months or 50
hours
Check
monthly and
change
annually
Every 3
months or 50
hours
Monthly or at
20 hours
Semi-annually
Semi-annually
Semi-annually
Semi-annually