Throttle Cable; Driveshaft Bearing; Choke And Cable - Polaris 600 RMK Owner's Manual

MAINTENANCE
Lubrication

Driveshaft Bearing

Inject grease into the fitting on the
speedometer sensor housing until grease
purges from the seal on the inside of the
tunnel. This should take approximately two
pumps. Do not use more than four pumps.

Throttle Cable

Lubricate the throttle cable lightly with
grease or oil. With the engine off, turn
the handlebars to the left and lubricate
liberally as shown.

Choke and Cable

Lubricate the choke slide and cables
lightly with oil or grease. Before
turning the engine off, operate the choke
intermittently to draw moisture out of
the choke plunger area and reduce the
possibility of the choke becoming
frozen.
75