Table of Contents
Advertisement
Available languages
Available languages
Tuner
Listening to the radio
1
4
2
3
These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on page 12.
1
indicator
BAND
Shows which band the radio is tuned to, AM
or FM.
2
indicator
FREQUENCY
Shows to which frequency the tuner is
tuned.
3
indicator
PRESET NUMBER
Shows what preset has been selected.
4
() indicator
STEREO
Shows that the frequency selected is being
broadcast in stereo.
1 Press
to select the tuner
SOURCE
.
2 Use
to adjust the sound level.
VOLUME
Rotate to increase or decrease the volume.
3 Press
to select a band
BAND/ESC
.
Press
until the desired band is dis-
BAND/ESC
played,
,
,
for FM or
.
F1
F2
F3
AM
4 To perform manual tuning, press 2 or 3
with quick presses.
The frequencies move up or down step by step.
5 To perform seek tuning, press and hold 2
or 3 for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
Section
03
• You can cancel seek tuning by pressing either
2 or 3 with a quick press.
• If you press and hold 2 or 3 you can skip
broadcasting stations. Seek tuning starts as
soon as you release the buttons.
Note
• When the frequency selected is being broad-
cast in stereo the
indicator will
STEREO ()
light.
Page 11
En
Hide quick links:
Advertisement
Chapters
Table of Contents
