Panasonic KX-TEA308 User Manual page 101

Advanced hybrid system
Table of Contents

Advertisement

If your PBX has a Panasonic VPS connected using Inband (DTMF) integration, your PBX
automatically sends a special signal to the Voice Mail port before connecting the caller. To
enable this feature, it may be necessary to set the signal format required by your VPS
before setting the Call Forwarding (FWD) destination to Voice Mail as follows:
Setting A: only sends the extension number to the Voice Mail port. To set or cancel,
enter "91#" or "90#" respectively after pressing the FWD/DND button or entering "71".
Setting B (default): sends "#6" followed by the extension number. "#6" is used by a
Panasonic KX-TVP series VPS to force the VPS port into voice mail service. To set
or cancel, enter "92#" or "90#" respectively after pressing the FWD/DND button or
entering "71".
For more details, ask your manager or dealer.
To listen to messages
PT/SLT
Off-hook.
To transfer a call to a mailbox (APT Integration only)
PT
During a conversation
(Voice Mail
Transfer)
Press Voice Mail
Transfer.
If your VPS supports APT Integration, you can also transfer received outside (CO) line
calls to a mailbox so that calling parties can leave messages. If you create a Voice Mail
Transfer button on your phone, you can transfer calls to a desired extension without having
to enter the mailbox number (Voice Mail Transfer).
The maximum recording time for caller messages depends on the VPS.
OR
(Message for
another extension)
OR
voice mail
extension no.
OR
4
7
8
Press MESSAGE, Message for
another extension, dial voice mail
extension number, or enter 784#.
An SLT user can enter "7840"
instead of "784#".
(DSS)
OR
desired
extension no.
Press DSS or dial desired
extension number.
1.8 Using User-supplied Equipment
User Manual
101

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents