Programming Tracks; Erasing The Program - Philips MCM275 Owner's Manual

Programming tracks

You may store up to 40 tracks in the desired
sequence. If you like, store any track more than
once.
1
In the stop position, press PROGRAM to start
programming
➜
flashes
➜ Audio CD: Display shows PROG and current
track number
MP3/WMA: Display shows current album/
track number
2
Press 4 / ¢ once or repeatedly until the
desired track number appears in the display
●
MP3/WMA: press ALBUM/ PRESET and
4 / ¢ to select the desired albumand
track
3
Press PROGRAM to confirm
➜
Display shows briefly the number of tracks
programmed
➜
Then, the display shows the track number
you just stored
4
Repeat steps 2-3 to select and store all desired
tracks.
➜ FULL is displayed if you attempt to program
more than 40 tracks
5
Press ÉÅ play the program
Helpful hints:
– The set will return to the stop position if no
button is pressed within 90 seconds.
disappears. To resume programming, press
PROGRAM.
– MP3/WMA: When playing a program, use of
ALBUM/ PRESET are void.

Erasing the program

You can erase the contents of the memory by:
● Press STOP 9
– once if in the stop position;
– twice during playback;
●
Press STANDBY-ON y
●
Select another sound source
●
Open the CD door
➜ disappears. CLEAR scrolls
CD
21